Library content manager blank

[aaronjinks91]

Today I watched the YouTube videos from Autodesk on creating an electronics library. I went through and created everything needed for my part. When I created the part and tried to assign a package to it, the only one that was available was the 2d layout I created although I also created a 3d model with the package manager. I saved the library and restarted Fusion and when I open the library, the content manager is blank, although the "thumbnail" in the data panel still shows the schematic symbol of the part I had made. The whole time I was making the different components for my part the content manager was blank, but at that time I thought it was because I had not tied them together into a part. I do not know how to edit the part in the library when there is no way to navigate to it, or any of the components that make up the part. 

I am running windows10 with Fusion360 v2.0.10440

[jakejjc1221]

Has anyone found a root cause for this issue? I am having the same problem where the content manager window in electronics library design is blank and there is a flickering black square within the window when i resize or collapse the content manger window. I've updated graphics driver, adjusted graphics settings in fusion, did clean windows install, uninstalled fusion and re-installed, logged out and in of fusion account. I really need to find a fix for this issue. 

[jorge_garcia]

Hi @jakejjc1221 ,

I hope you're doing well. What version of Fusion are you using? What's your operating system? These issues for the most part have been resolved in newer versions of Fusion. I just tried it on Windows and the content manager worked.

Let me know if there's anything else I can do for you.

Best Regards,

[jakejjc1221]

Here is the info from Fusion: 

Fusion 2701.1.18 x86_64
Active Plan: Personal
Windows 11 Pro 25H2 (26200.7840)

Here is PC info:

Edition Windows 11 Pro
Version 25H2
Installed on ‎3/‎3/‎2026
OS build 26200.7840
Experience Windows Feature Experience Pack 1000.26100.291.0

Processor Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3.00 GHz)
Installed RAM 16.0 GB (15.9 GB usable)
System type 64-bit operating system, x64-based processor

Here is graphics driver info:

Card name: Intel(R) UHD Graphics 630
Manufacturer: Intel Corporation
Chip type: Intel(R) UHD Graphics Family
DAC type: Internal
Device Type: Full Device (POST)

Device Problem Code: No Problem
Driver Problem Code: Unknown
Display Memory: 8261 MB
Dedicated Memory: 128 MB
Shared Memory: 8133 MB
Current Mode: 1920 x 1080 (32 bit) (59Hz)
HDR Support: Not Supported
Display Topology: Internal
Display Color Space: DXGI_COLOR_SPACE_RGB_FULL_G22_NONE_P709
Color Primaries: Red(0.672852,0.321289), Green(0.307617,0.617188), Blue(0.144531,0.068359), White Point(0.313477,0.329102)
Display Luminance: Min Luminance = 0.500000, Max Luminance = 270.000000, MaxFullFrameLuminance = 270.000000

Driver File Version: 26.20.0100.7262 (English)
Driver Version: 26.20.100.7262
DDI Version: 12
Adapter Attributes: HARDWARE_TYPE_GPU,D3D11_GRAPHICS,D3D12_GRAPHICS,D3D12_CORE_COMPUTE,D3D12_GENERIC_ML,D3D12_GENERIC_MEDIA
Feature Levels: 12_1,12_0,11_1,11_0,10_1,10_0,9_3,9_2,9_1,1_0_CORE
Driver Model: WDDM 2.6

[jakejjc1221]

Any update on this?

[lauri_barnhart]

Hi @jakejjc1221,

I wanted to check in and see if you still needed assistance, or if you found a solution to your question already? Let us know if you need further assistance by providing an update or if you have found a solution, please share it with the community so other members who may have the same question could learn from your experience.

All the best,

Lauri | Community Manager

[jakejjc1221]

No I have not found a solution yet and need some assistance. Thanks.

[Taylor.Chris]

Hi @jakejjc1221 ,

The initial image you uploaded is showing icons that have been replaced for a couple of years now which could imply an older build somehow.  I would try re-installing Fusion to make sure that everything is correctly up to date.  

[jakejjc1221]

Those images are from the original creator of this thread. My version of fusion is up to date and still has this issue.