Convert PCB Drawing with no Components to Gerber

[jjulianJ2NV3]

Hello Sirs,

I am still leaning Fusion 360, Can you please help me to convert my PCB drawing to Gerber? thank you for your help!

[yqliu]

@jjulianJ2NV3 , you can always do it using this command (or the one on the left side):

[jjulianJ2NV3]

Hello @yqliu,

My issue is the conversion of the Dimensional drawing itself to Gerber & not the export of a PCB design with circuit to  Gerber. My PCB drawing has no parts on it except for the copper trace. Kindly advise. thank you!

[yqliu]

Ok, I see. We create the PCB gerber from 2D PCB design. So, you will need to learn how to create a PCB design. Since you are new to Electronics environment, I created the gerber for you. Please check the attachment.

[jjulianJ2NV3]

Thank you @yqliu ... Can you recommend an online free training of Autodesk for me to learn what you did in the conversion from 2D/3D drawing to Gerber? thank you in advance. 

[yqliu]

You can find a lot of excellent tutorials from Fusion 360 electronics channel on youtube. For example, this one.