Blank 3D-model - Circular Dependencies

[erik.hole]

When I try to synch my PCB to 3D-viewer I get an error message and the model goes blank. Somehow Fusion is making it's own circulart dependency of the 3D-models.

Also. When are soldermask going to stop overlaying pads?

Best regards,

Erik Hole

[jorge_garcia]

Hi @erik.hole ,

I hope you're doing well. The soldermask issue will be resolved shortly so stay tuned for that. Now I don't know what could be going on without seeing the files. I'm going to tag the developers onto this thread, but if you have any files you can share that will help.

Best Regards,

[erik.hole]

Is there a way I can send the files in private?

[yiqiu.han · Accepted solution]

Hi, @erik.hole 

We have delivered a fix for circular dependency issue in May release of Fusion 360(2.0.10244+), you could break link for current 3D PCB and then generate a new one to abandon corruption 3D PCB. If you have any other workflow that would generate this problem again in the new build, please let us know.

For the stop layer cut soldermask area, it has been implemented in May release also, see my last post on https://forums.autodesk.com/t5/fusion-360-electronics/the-new-layer-set-dialog-is-restricting-workfl...

Thanks,

Yiqiu

[erik.hole]

Ok, glad to hear that some of the most annoying bugs are starting to be cleared up, as there are quite a few of them :')

I used the break link functionality to fix it, and got back on track.