Bibliotheksupdate fehlgeschlagen (Fehlercode 9.7.0-584). - Library update failed

[sven.glitschTWJH6]

Hi,

during using own old EAGLE projects and libs I wanted to replace older 2D devices directly or instead of this way I changed an old library by adding a package to the former device (symbol. footprint + package).

going the second way I got upper error message.

Who can help? What have I to be done?

[jorge_garcia · Accepted solution]

Hi @sven.glitschTWJH6 ,

I hope you're doing well. This is the second time I here of this error looks like something went wrong recently.

I'm going to pass this along to the developers.

Let me know if there's anything else I can do for you.

Best Regards,

[HelenChen-ElectronicsQA · Accepted solution]

Hi @sven.glitschTWJH6 ,

Sorry to hear that you're having trouble.

Could you please try to delete all the parts you want to replace and add the new part from Add Part list?

Hope it helps a little.

Regards,

Helen

[sven.glitschTWJH6 · Accepted solution]

Hi Jorge,

it seems that the self healing powers of Fusion solved that problem for the moment. In this meaning I would close this case.

Best regards

Sven

[sven.glitschTWJH6 · Accepted solution]

Hi Helen,

it seems that the self healing powers of Fusion solved that problem for the moment. In this meaning I would close this case.

Best regards

Sven

[HelenChen-ElectronicsQA · Accepted solution]

Hi @sven.glitschTWJH6 ,

Great news I'd like to share with you that today Fusion 360 has a new update version 2.0.10356 which has the fix about the issue you reported.
Could you please update Fusion 360 to latest version and try again? Hope it helps.

So sorry for any inconvenience and much appreciated for all your patient.

Regards,

Helen

[sven.glitschTWJH6]

Dear Helen,



thank you for this good news. After the fusion update it really works!
Really fine!



Best regards



Sven

[HelenChen-ElectronicsQA]

Hi @sven.glitschTWJH6 ,

Thank you very much for your confirmation. 🙂 

Please feel free to let us know if you need our further assistant and hope you have a great day!

Regards,

Helen

[Anonymous]

Hello I am having the same problem and I am on the latest version of Fusion 360. 

I am looking to replace all my parts to a new managed library as a result of another Fusion 360 short coming and now I can't even get around that short coming.

Please advise on what to do.

Oscar

[jorge_garcia]

Hi @Anonymous ,

I'm personally running into this too...😞 It's being investigated and we are looking for a solution. So far there have been two causes of this issue. One has been addressed the other is being worked on.

Best Regards,

[HelenChen-ElectronicsQA · Accepted solution]

Hi @Anonymous , @sven.glitschTWJH6 , @jorge_garcia ,

Hope all is well.

Good news I'd like to share with you that in latest Fusion update version 2.0.10564 which was out this week, we have put a fix about this issue.

Suppose everything should back to normal now.

Could you please have a try again with the latest Fusion and please let us know if you still have problem.

Hope all the best. Thank you!

Regards,

Helen

[sven.glitschTWJH6]

Dear Helen,

sorry if this case is open till now. The problem was fixed several weeks
before with one of the former updates. With the new update the error doesn't
occur too.

With best regards

Sven

[HelenChen-ElectronicsQA]

Hi @sven.glitschTWJH6 ,

Thank you so much for the confirmation. 🙂 

We fixed partial of the issue last time that some users' issues were addressed successfully while some were not, good news that and now we fixed the rest of the issue. 🙂

Enjoy with Fusion 360 Electronics. 

Feel free to let us know if anything else need our assistant. 

Regards,

Helen