Fusion Educators
Are you an educator who uses Fusion (formerly Fusion 360) in their courses in secondary and post-secondary? This is the official Autodesk forum for educators like yourself to share the success you are having with Fusion in the classroom.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

UNABLE TO POST 4 AND 5 AXIS PROGRAMS

1 REPLY 1
Reply
Message 1 of 2
darron.lanier
78 Views, 1 Reply

UNABLE TO POST 4 AND 5 AXIS PROGRAMS

Fusion will not let us post any 4 or 5 axis programs. It tells all my students these options need to be unlocked. Does the education side have these capabilities or what would be the solution. 

1 REPLY 1
Message 2 of 2
dan.banach
in reply to: darron.lanier

Hi @darron.lanier 

The 4 and 5 axis functionality is now in the Machining Extension. Autodesk Education accounts get access to the Extensions for free.

Educations accounts can access the Extensions for free by doing the following:

  1. On the top-right side of the screen click Extensions

danbanach_0-1663271117782.png

  1. In the Extension Manager dialog box, click on the desired Extension

danbanach_1-1663271117783.png

 

  1. Click on Start Access

danbanach_2-1663271117785.png

Note: The Extension will need to be renewed every 30 days (follow the same process).

Let us know if this helps.

-Dan

 



Dan Banach
Sr. Technical Manager & Community Manager

If my post resolves your issue, please click the Accept Solution button.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

You've got Fusion.


Autodesk Design & Make Report