Fusion Educators
Are you an educator who uses Fusion (formerly Fusion 360) in their courses in secondary and post-secondary? This is the official Autodesk forum for educators like yourself to share the success you are having with Fusion in the classroom.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

School is eligible but fusion360 shows: "expired"

1 REPLY 1
Reply
Message 1 of 2
martin_bergerFG3MA
85 Views, 1 Reply

School is eligible but fusion360 shows: "expired"

Hi, 

my name is Martin and im teacher at Pädagogische Hochschule Wien. 

I want tu use Fusion360 with my student class. 

The Account shows the message, that my school is eligible but if i start fusion360 i get the message: Expired

martin_bergerFG3MA_0-1705995075438.png

 

 

Ich i try the suggested solutions on my profile like clicking on "get license" nothing happens. 

 

Does my school Admin has to do anything? 

Do I have to buy one account?
Thanks for help. 
Martin 

1 REPLY 1
Message 2 of 2

Hi @martin_bergerFG3MA 

I can see that you have confirmed your education eligibility and have a Fusion license. After confirming your eligibility, you need to request a license for the desired software. Can you confirm that you did the following?

  1. Create or renew your Autodesk Account and Education Profile in the Chrome browser - Incognito window is preferred.

    Note: If you're renewing your Autodesk Education eligibility, you must also renew your Fusion Education license by following steps 3 - 7.
     
  2. Go to Autodesk Education site and sign in with your Autodesk credentials.
  3. On the Individual tab, on the Fusion 360 product card click "Get product".

danbanach_0-1706031913912.png

 

  1. Click on "ACCESS".

danbanach_1-1706031913912.png

 

  1. Launch Fusion 360 (if you're running Fusion from a browser, you can cancel the install).
  2. If the Education license does not appear on the top of Fusion's screen as shown in the following image, sign out and back into Fusion 360.

danbanach_2-1706031913913.png

 

 

Please let us know if you now have Fusion running.

Thanks,

-Dan

 



Dan Banach
Sr. Technical Manager & Community Manager

If my post resolves your issue, please click the Accept Solution button.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

You've got Fusion.


Autodesk Design & Make Report