Fusion Educators (Read-Only)
Are you an educator who uses Fusion (formerly Fusion 360) in their courses in secondary and post-secondary? This is the official Autodesk forum for educators like yourself to share the success you are having with Fusion in the classroom.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Message 1 of 2
136 Views, 1 Reply

WebGL disabled

Found an issue selecting and editing tools for new toolpath in fusion 360

after a July F360 update.  was off for the summer, ran into this getting classes

ready for the fall semester. see WebGL.png for details of the problem.

you could not select any tooling within the fine line red border.

Found the FIX on Autodesk Help.... see attached pdf.

to resolve this issue in my lab I had to Disable Tool Library - 3D Preview in Preview Features

hope this can be helpful to anyone experiencing the same issue


Mike Cannon

Pensacola State College

Program Coordinator / Instructor

Mechanical Design & Fabrication A.S.

Message 2 of 2
in reply to: misdaboatXT7KV

Hi @misdaboatXT7KV Glad you found a solution. If you update the graphics driver from the manufacturer's website (and not from Windows update) that should resolve the issue as well and you can leave the 3D preview on. I have a feeling there will be some future things where you will want to make use of this option. 





Kevin Ellingson
Technical Specialist

If my post resolves your issue, please click the Accept Solution button.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

You've got Fusion.

Autodesk Design & Make Report