Fusion Educators (Read-Only)
Are you an educator who uses Fusion (formerly Fusion 360) in their courses in secondary and post-secondary? This is the official Autodesk forum for educators like yourself to share the success you are having with Fusion in the classroom.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Metal sheet flange error

2 REPLIES 2
SOLVED
Reply
Message 1 of 3
tobias.gramhald
233 Views, 2 Replies

Metal sheet flange error

I made this frame with curved corners in metal sheet in aluminum and i want to make small flanges pointing away from the frame on the sides of it. But it wont allow me to do this. It says "cant complete sheet metal operation due to an internal error. check the body and bend perimeters, then try again". But it dosent work, even with other angles and such.

2 REPLIES 2
Message 2 of 3
kellings
in reply to: tobias.gramhald

Hi @tobias.gramhald For this to be a sheet metal part, it can't be a continuous body. You need a gap or rip in the body some place in your first extrusion. Once you do that you can then convert the part to a sheet metal part and then add the flange to the edge you are show. 

 

I noticed you posted this question to a few different forums. Please only post to one forum and make sure you are posting to the correct forum that fits your role. 


Let me know if that works for you. 

Kevin Ellingson
Technical Specialist

If my post resolves your issue, please click the Accept Solution button.
Message 3 of 3

Hi @tobias.gramhald 

This post was duplicated on another Fusion forum. Please don't duplicate posts on different forums, as this duplicates our efforts.

Thanks,

-Dan



Dan Banach
Sr. Technical Manager & Community Manager

If my post resolves your issue, please click the Accept Solution button.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

You've got Fusion.


Autodesk Design & Make Report