Fusion Educators (Read-Only)
Are you an educator who uses Fusion (formerly Fusion 360) in their courses in secondary and post-secondary? This is the official Autodesk forum for educators like yourself to share the success you are having with Fusion in the classroom.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Finding an area

1 REPLY 1
SOLVED
Reply
Message 1 of 2
agareau
102 Views, 1 Reply

Finding an area

Is there a command or an easy way to obtain the area of a cross-section of a given "Section Analysis" ?

1 REPLY 1
Message 2 of 2
kellings
in reply to: agareau

Hi @agareau. Not in the section analysis command, but you can create a plane where you want that section to be. Then you can put a sketch on that plane. 

 

From the create panel dropdown choose Project/Include--> intersect. Then use the body option and click your solid. You can then measure the area of the area as shown in the image below. 

 

MeasureArea.png

Kevin Ellingson
Technical Specialist

If my post resolves your issue, please click the Accept Solution button.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

You've got Fusion.


Autodesk Design & Make Report