Fusion Educators (Read-Only)
Are you an educator who uses Fusion (formerly Fusion 360) in their courses in secondary and post-secondary? This is the official Autodesk forum for educators like yourself to share the success you are having with Fusion in the classroom.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

can someone help

10 REPLIES 10
SOLVED
Reply
Message 1 of 11
Milsteinarlo
349 Views, 10 Replies

can someone help

How do I make this part less slanted? I am very new, so if you can help, please explain detailed Thanks!Screen Shot 2023-07-18 at 12.44.07 PM.pngScreen Shot 2023-07-18 at 12.44.30 PM.pngScreen Shot 2023-07-18 at 12.44.17 PM.png

10 REPLIES 10
Message 2 of 11
kellings
in reply to: Milsteinarlo

Hi @Milsteinarlo Can you share the file? You can go to the file menu and choose export and then choose Fusion 360 archive format, or you can right click on your file in the data panel and choose "share link". 

 

If you need more help with that, let me know. 

Thanks,


Kevin

Kevin Ellingson
Technical Specialist

If my post resolves your issue, please click the Accept Solution button.
Message 3 of 11
Milsteinarlo
in reply to: kellings

Message 4 of 11
Milsteinarlo
in reply to: Milsteinarlo
Message 5 of 11
kellings
in reply to: Milsteinarlo

Thank @Milsteinarlo I was able to open your file. Can you explain further what you want to change about it? 

 

Thanks,


Kevin

Kevin Ellingson
Technical Specialist

If my post resolves your issue, please click the Accept Solution button.
Message 6 of 11
Milsteinarlo
in reply to: kellings

the outside part that is like a semi circle I want to make the edge connected to that wanted instead of just an abrupt height change

Message 7 of 11
kellings
in reply to: Milsteinarlo

@Milsteinarlo Something like this? 

Screen Shot 2023-07-18 at 1.06.55 PM.png

Screen Shot 2023-07-18 at 1.07.49 PM.png

Kevin Ellingson
Technical Specialist

If my post resolves your issue, please click the Accept Solution button.
Message 8 of 11
Milsteinarlo
in reply to: kellings

haha not exacty what i was thinking i am trying to make a piece to fit around this part and was just trying to make the inside corner smoother where the two shafts would go

Milsteinarlo_0-1689703951463.jpeg

 

Message 9 of 11
kellings
in reply to: Milsteinarlo

Is your goal to have the blue part fit as a negative in the grey part? Do you have a file for the blue part? 

Kevin Ellingson
Technical Specialist

If my post resolves your issue, please click the Accept Solution button.
Message 10 of 11
Milsteinarlo
in reply to: kellings

thank you so much for your help but I figured it out!

Message 11 of 11
dan.banach
in reply to: Milsteinarlo

Hi @Milsteinarlo 

Can you tell us what you did to solve the problem?

 

Thanks,

-Dan



Dan Banach
Sr. Technical Manager & Community Manager

If my post resolves your issue, please click the Accept Solution button.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

You've got Fusion.


Autodesk Design & Make Report