Sweeping in Fusion 360

[Anonymous]

Hey guys, I am new to fusion 360 and i need help.

I was using the sweeping tool and came across 2 different distance fields after I selected the profile and the path and it wont let me go ahead and execute the sweep.

Here is a photo::

 I have no idea what to do now so if you have any ideas please reply 😉

thanks

[Anonymous]

Regards and welcome!! please can you upload your file here?? or please upload other image showing the path.

[Anonymous]

Now I can observe your problem, I could not see well the image you attached, these choosing as a path a closed outline of a sketch that is also a copy of the one you want to sweep, is a little further to apply the command in this way. You must leave a single path on which the profile you chose can be swept away. Eliminate the top or bottom line of the sketch where you have the path and do the test!

[Anonymous · Accepted solution]

Look this screencast to see what i say. I hope you solve with this example.