Sketch selection problem

[geryggTL98L]

I made an .SVG from a logo on Illustrator, but when I import it to Fusion I cannot select only the fill part from it, it selects it all. I'm new to 3d and no idea how to solve this.

Thanks!!

[davebYYPCU]

Sketch is fine, 14 spline curves, moves as a unit, not on the Origin, and not constrained.

Copies and scales.

Might help....

[MaxHugen]

Were you able to edit the spline points themselves, such as reposition them, modify the curves etc?

[davebYYPCU]

Yes and no, can click drag the splines, and not the points, likely due to being imported.

[MaxHugen]

That's interesting.
In Edit view, I can select a point but it doesn't display the splines.

[g-andresen]

Hi.

1. Please start a new thread for such questions in the future.

2. Even if the segment is called a spline, it does not mean that it is editable like a spline.

My Tip:
1. fix the contour
2. create a new spline in a new sketch. (only a few control points!!)

Screencast

günther

[davebYYPCU]

More like weird.  I have no experience with control point splines.

These splines are control point, and select > Right click, you can display the control point frame.  The intermediate points are editable but the start and finish point will remain unmovable.

[g-andresen]

Hi,

If you have activated the Control frames complett, you create tangential conditions and then edit the contour.
After you have done this a few times, you´ll create the spline from scratch.

günther