rectangle with diagonal

[simon1199]

i want to sketch rectangle with lines (like diagonals, see the picture i added)

i did it manually, is there an option to automate the process for example: input information about distance between lines and angel and generate a pattern?  

[g-andresen]

Hi,

What do you want to achieve in the end? > picture
Patterns should not be created in sketch mode (although this is possible), but as a feature/body in body mode.

günther

[simon1199]

Thanks I am new to the software and not familiar with the correct workflow

What I want to create is rectangle that has line stripes of 3mm of depth,T distance between them and angle of D degrees with the x axis. the ability to change the rectangle size, distance between stripes and the degree. 

Thanks

[g-andresen]

Hi,

try this

günther

[g-andresen · Accepted solution]

Hi,

here´s a parametric version.

günther

The occasional warning (yellow) can be ignored because they are caused only when elements are outside the body.

[simon1199]

thanks very much

if I change the dimension from 300X120 to any other it does not work

any way to fix it? thanks

[g-andresen]

Hi,

---

@simon1199  schrieb:

if I change the dimension from 300X120 to any other it does not work

any way to fix it? thanks

---

Of course you have to adjust the base length for the slot.
I did it in the parameter list.

günther

[g-andresen · Accepted solution]

Hi,

additional parameters:

günther

günther

[davebYYPCU]

Or just add 2 lines.  

Might help.....

[g-andresen]

Hi,

---

@davebYYPCU  schrieb:

Or just add 2 lines.  

---

Clever!

günther