Press/Pull multiple surfaces simultaneously?

[Anonymous]

I need to add some relief to some sheetmetal component edges to allow for powder coating. The component is a simple extrusion (11-gauge steel) but is a fairly complex shape. Rather than have to select each side surface and perform a Press/Pull individually, I'd like to be able to select a group of side surfaces with the Window Selection tool. However, after I've selected all my desired side surfaces and apply Press/Pull, it deselects all but one surface and only applies the Press/Pull to that single surface. Is there any way I can force Fusion to apply the Press/Pull command to multiple surfaces simultaneously?

[jeff_strater · Accepted solution]

Yeah, this is an unfortunate glitch in the Press/Pull workflow.  You can get there, but it's a big ugly.  You need to select the first face, start the Press/Pull command, make sure the type is set to "New Offset", then you can select more faces.

[Anonymous]

Bummer. Thanks for the workaround though. Is this on the roadmap to be fixed?

[jeff_strater]

It is.   The internal item is FUS-27456.  I wouldn't expect it to be addressed soon, but I hope we do get to it one day...