Physical Material Library

[andrewdunn40]

Hi,

I need to add 6063 T6 Aluminium to my PML. I have read the post I could find and I think I have it right but am not to sure about it.

Could someone who has done it in 360 please just post a screen of the Physical page please.

Thanks very much

Andy

[g-andresen · Accepted solution]

Hi,

try

günther

[andrewdunn40]

Thank you for that but its' the Basic Thermal, Mechanical and Strength values for 6063 t6 all filled in that I was after.

[jhackney1972 · Accepted solution]

Here is a link to the MatWeb data sheet for this material.  With this data you can create you own material in the Fusion 360 Material Library using the method already outlined for you by @g-andresen 

[andrewdunn40]

Guys Thank you both for your help. I used the data sheet and I think I have it filled in right but I would be very grateful if you could take a look at it and let me know how I'v done.

Kind regards

Andy

[andrewdunn40]

Hello guenther,

you where kind enough to try to help me out with my problem. I think I have entered the 6063 aluminium now and have  attached a screen shot of how I filled it in. I would be so very grateful if you could take a look and tell me if I have it right.

kind regard

Andy