Parametric Model, Having issues finding the correct formula.

[jason.brain]

Hi Guys,

              I am having a bit of mind meltdown. I have made a parametric model and am having a bit of problem spacing the drawers.

The drawer front sketch should autocalculate depending on the number of drawers and cabinet height.

the rectangular pattern at the end should calculate the amount of drawers and ideally space them with a drawer gap in between to the height of the cabinet?

Any help greatly appreciated.

jay

[jhackney1972 · Accepted solution]

Take a look at the Screencast for a couple of suggestions to make your work in parameters a lot easier and also some things specific to your model.  Model is attached.

[jhackney1972 · Accepted solution]

This topic was double posted and I am hoping you will still take a look at my solution and Screencast.  I feel I have a couple of good ideas to share.

[jason.brain]

Hi John,

               Apologies for the lateness of reply. I did not relkise I had double posted. This is an excelent solution and I have learned a gret deal from it. Thankyou for your time!

Jason