Issues separating 2 folded pieces into flat patterns

[Anonymous]

I am new to Fusion, maybe 60 days, I started with Draftsight, moved to Inventor and now to Fusion 360 mainly for budget reasons.

I am self taught (slow process since I am 64 and haven't done any drafting since high school and never CAD before this)

I have created a counter top with flanged edges and then I split it in to two sections. I would like to flat pattern the 2 pieces of the counter top, this will allow us to handle the sheets in smaller pieces in the press brake and then short welds to make the top one piece. 

@jhackney1972 

Is this possible? Bodies? Components?  I am really lost

I have been able to get one of the pieces to flatten but zero luck on the other one

Appreciate your time

System would not allow me to copy/paste a link to the part....is there another way?

Thanks,

Fred Overstreet

Impervicote Metal Counters

Gravette, AR

[jhackney1972]

Please attach you Fusion 360 model up to the point of your question.  If you do not know how to attach your model, open it in Fusion360, select the File menu and then choose Export and save the .F3D file to your hard drive. Then use the Attachments section of a reply forum post to attach it.

[Anonymous]

Crossing my fingers here

[jhackney1972 · Accepted solution]

I hope I understand what you desire, if not, after viewing the Screencast and looking at the model, let me know.

[Anonymous]

That is exactly what I was looking for. You made it look simple. Thank You!

[Anonymous]

Thanks for the help John - I was pretty confident you could help out!