Is it possible to make this part in fusion?

[boryelwoc]

Hi i need to reproduce this shape in fusion but the small lip at the bottom around the eye is really stumping me?

Is it possible to do?

Thank you 🙂

[TheCADWhisperer]

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Split Face

Offset Surface and Thicken

or

Press/Pull

[boryelwoc]

Hi thank you for responding see  file below hope you can help.

https://drive.google.com/file/d/1jxPMk1nvF2AjE_pWtvqx_pFrq-GWy2d4/view?usp=sharing

[boryelwoc]

https://drive.google.com/file/d/1jxPMk1nvF2AjE_pWtvqx_pFrq-GWy2d4/view?usp=sharing

[TheCADWhisperer]

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Note: Not a link to 3rd party site.  Attach directly here.

[boryelwoc]

hope it works?

[TheCADWhisperer]

---

@boryelwoc wrote:

hope it works?

---

Well, it worked, but I am going to pass on this one.

I tend to fully define my sketches and rarely use Move.

[boryelwoc]

would you say its not possible? i might export to zbrush its a shame fusion cant do it though?

[TrippyLighting]

You did not listen!

Of course, that can be done in Fusion 360.

However, your timeline is such a disaster that making edits is useless.

In other words, I would strongly recommend you go through a tutorial course in the Learn & Support section to familiarize yourself at least with the minimum basics of parametric design before continuing flying blind.

[TheCADWhisperer]

---

@boryelwoc wrote:

... its a shame fusion cant do it though?

---

Actually, pretty easy in Fusion.

[boryelwoc]

I am still learning the program so was hoping for help. But i will work it out on my own thanks anyways.