Announcements

Starting in December, we will archive content from the community that is 10 years and older. This FAQ provides more information.

How to use the Web Tool on cylinders

nick.jander
Explorer
Explorer

How to use the Web Tool on cylinders

nick.jander
Explorer
Explorer

Hello there,

 

I am new to Fusion 360 so I am currently watching the Self-paced learning videos.

I wanted to recreate a model from the video Quick Tip - Sketch gems 3 in Advanced part modeling techniques (https://help.autodesk.com/view/fusion360/ENU/courses/AP-TIP-SKETCH-GEMS-3).

But I cannot figure out, how I could create the diagonal web/rib on the cylinder (see attachment). I tried several things with 3D splines and projections. The vertical ones are no problem though.

 

Thanks in advance for any ideas.

0 Likes
Reply
Accepted solutions (1)
431 Views
3 Replies
Replies (3)

TheCADWhisperer
Consultant
Consultant

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

0 Likes

nick.jander
Explorer
Explorer

Hi,

 

I guess you mean the model of my cylinder right? I recreated the model again as the other one was clustered with failed sketches and projections.

0 Likes

Bunga777
Mentor
Mentor
Accepted solution

Sketch like this.

bunga_0-1666875776041.png

Use the EMBOSS command to create a concavity.

bunga_1-1666875905795.png

 

Fillets were added and copied in four directions.

bunga_0-1666936864412.png

 

 

 

0 Likes