Help sketching a drumstick model with rotary Toolpaths

[thedoncutta]

Hello Ive been working on this project with my kids for a while. We stopped because we just can't seem to figure fusion out, any help is appreciated.

[jhackney1972]

The Forum needs more information.  A picture of what you want and your model.  Without something more, the design is only in your mind.  If you do not know how to attach your model, Open the model, select File menu, then Export to your hard drive.  Attach to a reply post.

[thedoncutta]

Here’s the specs…Many thanks a video on the design and toolpath creation would be awesome 🙏🏾🙏🏾

Length: 17.1 inches 

Diameter: .72 inches 

Shaft: 12 inches

Taper: 4.25 inches

Neck at Bead: .39 inches

Bead length: .85 inches 

Bead Diameter: .62 inches

Bead Shape: Taj Mahal 

 

[Bunga777 · Accepted solution]

There have been similar posts before, but the method did not solve the problem at this time?

https://forums.autodesk.com/t5/fusion-360-design-validate/help-with-sketching-a-drumstick-model/m-p/...

[Bunga777 · Accepted solution]

I made it.

Sketch.

Revolve

Video here, please refer to it.

https://knowledge.autodesk.com/community/screencast/43d4fe47-07f4-4698-b79e-77e2ccd69c14

Data is also attached.