[HELP] Fill gap between two bodies, to combine them and join them

[oluwadarasimi.paiten]

Hi, I need fill gap between two bodies, to combine them and join them.

Using loft I did not succeed, the two faces are in parallel, and without any space between them.
I already solved creating 0.1mm offset from profile 2, and extrude to join to profile 1, but is so weird. Any quick solution for this?
I read this, but using patch workspace, I try use, but doesn't work as well. I want a solution only with model workspace if it is possible
https://forums.autodesk.com/t5/fusion-360-design-validate/joining-filling-between-two-surfaces/m-p/7...

See the prints below:

cant loft in 0mm diff and paralel surfaces

[sanket223.patil]

Can you export your file .

[dghylin]

Have you tried the 'Combine' command?  If the two bodies are touching, that should work....

[TrippyLighting]

---

@dghylin wrote:

Have you tried the 'Combine' command?  If the two bodies are touching, that should work....

---

That might be true but based on these screenshot it would still be a pretty bad idea.

[dghylin]

---

@TrippyLighting wrote:

---

@dghylin wrote:

Have you tried the 'Combine' command?  If the two bodies are touching, that should work....

---

That might be true but based on these screenshot it would still be a pretty bad idea.

---

Well, from his posts, he didn't like the idea of separating them and lofting between them so....what is(are) the other procedure(s) available to him??  Probably wouldn't work for him but I guess he could create 'selection set'.

And, If you can tell from the screenshots what he's after, you're much better than I am, of which I have no doubt......:)

[oluwadarasimi.paiten]

Sorry I can't. But the simple example is make a hole in a surface, and how do you fill the hole, without use extrude methods.

[oluwadarasimi.paiten]

Sorry I can't. But the simple example is make a hole in a surface, and how do you fill the hole, without use extrude methods.