Forum issues?

MRWakefield · ‎02-15-2020

Is anyone else having issues with the forum since last night (UK time that is). I've had issues with not being able to embed screencasts, previewing a reply results in no preview and clearing of the reply form and no 'Load or Discard' if I went back to a reply I'd abandoned. As well as that there appears to be a loss of all posts between yesterday and November 2017! I've cleared my Firefox cache etc. and I've also tried in Chrome with the same issues. Some of the features seem to be coming back slowly like being able to embed screencasts and the 'Load or Discard' has now returned as well.

I'm pretty sure I'm not the only one experiencing these issues. Are the admins aware and are these issues being looked into?

If this answers your question please mark the thread as solved as it can help others find solutions in the future.
Marcus Wakefield

____________________________________________________________________________________
I've created a Windows application (and now Mac as well) for creating custom thread files for Fusion. You can find out about it here. Hope you find it useful.
If you need to know how to offset threads for 3D printing then I've created a guide here which you might find useful.
If you would like to send me a tip for any help I've provided or for any of my software applications you've found useful, you can do this via my Ko-Fi page here.
____________________________________________________________________________________

wmhazzard · ‎02-15-2020

I did notice the posts from 2017 listed as new.

MRWakefield · ‎02-16-2020

Thanks @wmhazzard , it's not just me then. I wonder what's happened to all the posts between Nov 2017 and a couple of days ago?

If this answers your question please mark the thread as solved as it can help others find solutions in the future.
Marcus Wakefield

____________________________________________________________________________________
I've created a Windows application (and now Mac as well) for creating custom thread files for Fusion. You can find out about it here. Hope you find it useful.
If you need to know how to offset threads for 3D printing then I've created a guide here which you might find useful.
If you would like to send me a tip for any help I've provided or for any of my software applications you've found useful, you can do this via my Ko-Fi page here.
____________________________________________________________________________________

TrippyLighting · ‎02-16-2020

No, it's not just you. I can also see posts from 2017 listed as new.

MRWakefield · ‎02-16-2020

Thanks @TrippyLighting, I guess the admins are aware and are hopefully working on it.

If this answers your question please mark the thread as solved as it can help others find solutions in the future.
Marcus Wakefield

____________________________________________________________________________________
I've created a Windows application (and now Mac as well) for creating custom thread files for Fusion. You can find out about it here. Hope you find it useful.
If you need to know how to offset threads for 3D printing then I've created a guide here which you might find useful.
If you would like to send me a tip for any help I've provided or for any of my software applications you've found useful, you can do this via my Ko-Fi page here.
____________________________________________________________________________________

TrippyLighting · ‎02-16-2020

@MRWakefield wrote:

Thanks @TrippyLighting, I guess the admins are aware and are hopefully working on it.

Not sure they are. @brianrepp can you confirm?

brianrepp · ‎02-16-2020

Hello - there was some planned maintenance related to the Preview forum and Ideastation. I’m guessing some of these 2017 posts came in from another board as part of this effort (but for some reason did not re-sort properly), but I will confirm.

MRWakefield · ‎02-16-2020

Ah, yes, I see the posts I thought were missing are just further down the list!

If this answers your question please mark the thread as solved as it can help others find solutions in the future.
Marcus Wakefield

____________________________________________________________________________________
I've created a Windows application (and now Mac as well) for creating custom thread files for Fusion. You can find out about it here. Hope you find it useful.
If you need to know how to offset threads for 3D printing then I've created a guide here which you might find useful.
If you would like to send me a tip for any help I've provided or for any of my software applications you've found useful, you can do this via my Ko-Fi page here.
____________________________________________________________________________________

MRWakefield · ‎02-16-2020

The sorting of threads has got even worse now. I've had to go all the way to the 10th page to get to recent threads, including this one!

Ok, it seems to be sorted now (if you'll excuse the pun!).

If this answers your question please mark the thread as solved as it can help others find solutions in the future.
Marcus Wakefield

____________________________________________________________________________________
I've created a Windows application (and now Mac as well) for creating custom thread files for Fusion. You can find out about it here. Hope you find it useful.
If you need to know how to offset threads for 3D printing then I've created a guide here which you might find useful.
If you would like to send me a tip for any help I've provided or for any of my software applications you've found useful, you can do this via my Ko-Fi page here.
____________________________________________________________________________________

jodom4 · ‎02-24-2020

Hey guys,

You caught us in the process of making sausage. I just checked and it looks like everything's sorted properly now, but please feel free to ping me if you see anything out of order (man, there are a lot of pun opportunities on this topic).

Jonathan Odom
Community Manager + Content Creator
Oregon, USA

Become an Autodesk Fusion Insider

MRWakefield · ‎02-24-2020

Thanks, we'll be sure to let you know if anything's amiss. I won't mark it as solved yet in case something odd shows up.

If this answers your question please mark the thread as solved as it can help others find solutions in the future.
Marcus Wakefield

____________________________________________________________________________________
I've created a Windows application (and now Mac as well) for creating custom thread files for Fusion. You can find out about it here. Hope you find it useful.
If you need to know how to offset threads for 3D printing then I've created a guide here which you might find useful.
If you would like to send me a tip for any help I've provided or for any of my software applications you've found useful, you can do this via my Ko-Fi page here.
____________________________________________________________________________________