Circulair pattern from sketch from other axes possible ?

[Anonymous]

I'm trying to get this resault in Fusion 360(an circailar pattern of a sketch), wich I thought can't be that hard, but I'm strugeling a bit.

I need the curves for a pipe operation.

I'm only be able to do it from the same plane.

I allready  rotated the sketch 90` with move, and tried the pattern again but no luck.

Thanks Kev.

 

[HughesTooling]

Fusion will only pipe one path at a time, it will not allow you to have a branch in the path like Y shape. So you only need one path, pipe then make a circular array of the pipe like this.

Mark

[Anonymous]

Thanks for your reply mark.

The issue is not with pipe,I'm aware of that.

My problem is  I want to create a circulair pattarn from the sketch as I did in my screenshot.

Thanks Kevin.

[HughesTooling]

Well you've already proved pattern will not work on 3d geometry so the only other workaround I can see is to use copy\paste. When you paste relocate the pivot and rotate each copy.

Mark

[Anonymous]

Thanks !

Copy paste it is, a bit of a work arround but not to bad.

I will place a post in the 360 ideastation, as it would be great to have a bit more sketch manipulation possibilitys in 3D such as in Rhino.

Kevin.