cam-tapped simulation

cam-tapped simulation

Anonymous
Not applicable
742 Views
1 Reply
Message 1 of 2

cam-tapped simulation

Anonymous
Not applicable

hi guys,

i have this problem: i am creating a cam-tapped mechanism for a steam engine, but i can't realize the perfect contact between tappet and cam, if i move the cam i can do the up-motion of the tappet but i can't constrain the contact in the down-motion....

how can i do this feature...i have no idea!

 

this is only for a motion studi, not for a dinamic simulation or somethig else.

 

thank you for the aid!!

 

 

0 Likes
Accepted solutions (1)
743 Views
1 Reply
Reply (1)
Message 2 of 2

NicolasXu
Autodesk
Autodesk
Accepted solution

Welcome to the community!

 

From the screenshot you attached, I believe you have known contact set is one of the key for your purpose. Another key is the Rest option for joint limit. It will try to push the joint back to the rest position.

 

Please refer to the gif below for details.

Cam-Tapped.gif

 

 

Hope it's helpful. If you have any questions in future, please feel free to post here.



Nicolas Xu
Sr. SQA Eng.
Fusion 360 Quality Assurance Team
Autodesk, Inc.