CNC Post Processing Issue - G Code Not Initiating CNC Production

[Anonymous]

Hello

I'm a newbie to the Fusion 360 Auto Desk manufacturing process. I've recently joined a shop that has a CNC machine, and I've built my part to be manufactured on the CNC machine.  The trainer has walked me through everything and it seems to be working ok; however, when the G code gets exported and loaded the CNC machine system, it's not showing that it will process and manufacture the part. 

My code was made in fusion 360, and run on match 4 at the machine. No errors when post processed, and no errors when simulated. It just pauses at one line and doesn't progress.

Details: 

The CNC is 'Avid CNC Pro 5x10'

The trainer uses a chrome book

I use a Mac with the following Version:

≈AutoDesk Version

I've attached the files (in looking through the blog that I think might be important to troubleshoot) : .nc & .f3d.

When we review the CNC processing from my mac, it seems to be working, but when imported into the CNC machine, the machine starts, but does not move or show that anything is working.  

Any help would be appreciated. If you need additional settings or details, let me know where to find them in my software and I'll post accordingly.

thanks

[Anonymous]

Well, you got few things mixed up in your setup, Z needs to point up, assign stock dimensions so you can see some results in simulation and program "name" must be a number.

Your NC file plotted like this, good thing it did not run, possible crash.

It didn't run because program needs to start with percentage sign, "O", and number next to it.

Here is what it looks like after correcting few things, and removing large fillet from inside corners.