Announcements
Visit Fusion 360 Feedback Hub, the great way to connect to our Product, UX, and Research teams. See you there!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

STL to CAD

STL to CAD

Hi there,

 

I was asked to post to this forum to give my feedback on a workflow for dealing with STL file conversion.  As 3D printing gains in popularity, dealing with these files will become more and more important.  Additionally, I am aware of the BMesh tool that can convert smaller STL files, but also, as 3D printing gains in popularity, so will 3D scanning.  My 3D scans range from 500K polygons, up to 2.5M polygons, which is outside what you suggest for the BMesh tool.  Here is my suggested workflow:

 

-import .OBJ or .STL

-load it into the creation tool

-give simple commands (similar to the ones in SketchUp) that allow me to "help" your program deal with the mesh.  Allow me to draw planes, circles, polygons as individual areas with "generally" the right curves, angles, etc. using the same deformation tools as in the main Fusion program

-have each drawn plane "snap" to points on the STL in a general sense.  Have the new drawn plane "color" the STL so I know what have covered and what I have not

-snap surfaces near each other together to make them contiguous, maybe use a knife tool to split them if you need to

-have Fusion convert those items into parametric surfaces

 

...the key here is that the program should leverage the human's understanding of what they want to give hints to the program.  Even if I scan things that are extremely complex, I would not mind going through and adding in surface data manually, if it gave a good result.

6 Comments
schneik-adsk
Community Manager
Status changed to: オートデスク審査落選
 
schneik-adsk
Community Manager
Status changed to: Implemented
STL to BREP/Solid was added in the May 21st update. Create a base feature, then in modify import a mesh/stl. in modify group use mesh to beep to convert to solid.
Anonymous
Not applicable

I can't figure out how to do this. Is this still implemented? When I go to Modify, import is not an option.

Anonymous
Not applicable

Ah, I see it's now under Insert, not Modify. 

Anonymous
Not applicable

hello gys. I have the 2017 version and i have the same problem. i cant convert a scanned object (stl) to a solid object. could you help me with this ?

nkloski
Collaborator

This is totally in Fusion now (since the original posting in 2014).  In order to easily convert an STL to a solid surface, you will need to import the model as quads.  STL's are not quads, so you would need to use a program like "Instant Meshes" to convert it or something like that beforehand.

Can't find what you're looking for? Ask the community or share your knowledge.

Submit Idea  

Autodesk Design & Make Report