Make a Tutorial For Rhinoceros Users (Rhinoceros Transition Guide)

[Anonymous]

I am a Rhinoceros user.

I would like to see a tutorial made for Rhinoceros users like me.

This tutorial should have:

1. A table with a comparison of each Rhino command and its equivalent in Fusion 360.
2. Different approaches in Fusion 360 to get the same result as we get in Rhino.
3. What Rhino can do and Fusion 360 cannot and workarounds.
4. What Fusion 360 can do better and faster than Rhino.
5. Comparison between interfaces.

[TMC.Engineering]

I would be willing to help with this, but I know nothing about rhino.  would you be willing to create the list of rhino commands and a little video/ screen shot to go with each one?  I could then offer an equivalent in Fusion.  some sample designs could help flush out numbers 2 and 3.

I would also recommend reading Rule 1  for anyone using fusion

[Anonymous]

Thank you TMC.Engineering for your suggestions.

But if you know nothing about Rhinoceros you cannot make this kind of tutorial.

Someone made this kind of tutorial, but it is for Solidworks users, click to see: SolidWorks Transition Guide

[TMC.Engineering]

I know of the SW transition guide and I would think many people were involved in making it. I would also think that these people have different experiences some with SW experience ans some without.  I personally have used solidworks only a handful of time but I have helped people transition from it.  I tell everyone is to not try and force software XYZ.

Tutorials are not difficult but they are time consuming and I was not suggesting I would make the tutorial but rather WE and the rest of the community could work on it.  You know the Rhino side, I and others know the fusion side.  This is why I asked for you to create the list of commands with examples from a rhino prospective. then others can file in corresponding fusion solution to achieve equivalents.  also adding multiple specific examples of things you are trying to make helps steer the tutorial development.  

[Anonymous]

Sorry TMC.Engineering, but I know almost nothing about Fusion 360.

The detailed list of Rhinoceros commands, with explanations and videos:

• http://docs.mcneel.com/rhino/5/help/en-us/index.htm

These videos:

• https://vimeo.com/49953944
• https://www.youtube.com/watch?v=m1sUKZQWgJU

[smallfavor]

I'm coming from Rhino as well.  I like to see some interface conventions included as options in the preference dialogue.