Latest Updates | New Knowledge Network Articles | Fusion 360

[matthew.d]

Question: Where can I find a list of the latest Autodesk Knowledge Network support solutions that were created and/or updated for Fusion 360?

 Subscribe to receive updates for new Fusion 360 Knowledge Network articles.
For more updated solutions, also check out the AutodeskHelp Blog!2016 Solutions

[matthew.d · Accepted solution]

December 2017

Request for Takumi V10 post processor for Fusion 360 or HSM product

Request for Mazak VTC-20B post processor for Fusion 360 or HSM product

Some bodies are missing when importing DWG file into Fusion 360

How to install and use Slicer for Fusion 360

Importing custom symbols in to Fusion 360 drawing

Fusion 360 crashes when converting BRep to Tspline using curvature length spacing

Fusion 360 app for Android crashes after upgraded to Oreo

2D Chamfer toolpath generates unnecessary retracts on a hole

3Dconnexion Space Navigator works nothing or only zooming in Fusion 360

Cannot find dataset files for Fusion 360 Adoption Portal

Fusion Sync coverts PCB profile to jagged curves as pulled to EAGLE

Slow Behavior with Space Navigator

Adding a flag note symbol to Fusion 360 drawing

Fusion 360 fails to create chamfer between near tangent faces

Fusion 360 fails to install within Sandboxie

Fusion 360 fails to orbit around selected point

Fusion 360 fails to select text using window selection in Sketch mode

Fusion 360 Help does not activate Chrome browser

Fusion 360 prompts user to re-login whenever it’s opened and a “sufficient data not found to switch ...

Sketch constraint preview in Fusion 360 indicates “fully-constrained” when it is not

Unable to reinstall Fusion 360 after performing a system restore

Why is open passes linked with both ways zig-zag warning appearing in Fusion 360 CAM

Fusion 360 file is blank when being viewed in the Fusion 360 Mobile App

November 2017

2D Drawings Roadmap for Fusion 360

Browser of Fusion 360 is empty

Cannot select sketch point to scale sketch entities around in Fusion 360

Do I qualify for free use of Fusion 360?

Error: Internal Error: Regularization failed in Fusion simulation

FTNF-604 error when view files on the A360 or Fusion 360 mobile app

Fusion 360 - Timeline error: The model is using cached geometry to solve. Please reselect reference ...

Fusion 360 cannot open Brackets when posting G code

Fusion 360 installation error “urlopen error EOF occurred in violation of protocol (_ssl.c:720)”

Fusion 360 learning videos not working

Fusion 360 outputs multiple files when post processing CAM tool paths

Fusion 360 separately available for Students and Educational Institutions

Fusion 360: Can we assign rigid body behaviour to components in Fusion 360 simulation.

Fusion 360: Message “Error: Mesh failed: Face failure” in Fusion 360 Simulation During the Mesh Proc...

How to create a twist in an extrude or sweep in Fusion 360

How to sync the environment setting in Fusion 360 with the setting in the web viewer

How to update a Lab Installation of Fusion 360

HSM crashes Inventor when creating CAM setup from DWG

Installation Error with Fusion 360

Inventor assembly is stuck processing when uploaded to Fusion Team

Need a post processor for Doosan 2600Y for Fusion 360 or HSM product

Parts list headings are at the bottom instead of the top of the table in a Fusion 360 drawing

Post processor output folder default not maintained Fusion 360 CAM

Project sketch dialog box has inconsistent behavior with the other dialog boxes in Fusion 360

Request for LinuxCNC plasma post processor for Fusion 360 or HSM

Stuck in 30 day Trial Mode in Fusion 360

The height of a Sheet Metal flange does not match the selected height datum in Fusion 360

Turning profile does not cut to center of face when roughing passes disabled Fusion 360

Unable to export Fusion 360 designs from expired trial account

View cube does not show up in Fusion 360

October 2017

A DXF file uploaded or inserted into Fusion 360 is empty

Black workspace in Fusion 360 with ESET NOD32 anti-virus software

Can I use Fusion 360 without logging in?

Cannot create 3D model in Fusion 360 mobile application

Easy way to change the sketch dimension in timeline

Form mill tool previews too large when in IN units Fusion 360 CAM

Fusion 360 - Failed to get client ip address [Errno 8] nodename nor servname provided, or not known

Fusion 360 - How to turn off unit display in Drawings

Fusion 360 crashes when saving

Fusion 360 Errors Traceback and MakeTime AddIn prevent application from opening

Fusion 360 keeps uninstalling after closing

Fusion 360 Tangent joint Error : selected joint type will result in conflict

How to bring the leading zero of a dimension back in the Fusion 360 drawing

How to change Mazak 5-axis post processor for indexing

How to dimension an arc length in a Fusion 360 sketch

How to edit flange extents in the sheet metal workspace of Fusion 360

How to extract a sheet metal component from a generic CAD format in Fusion 360

Japanese characters do not display properly when importing Parasolid file

Random lines appear in Fusion 360 drawings environment (Graphics-related)

The download link from an exported OBJ in A360 is broken

Training/Learning resources for Fusion 360

Useable file formats to import and export data between Rhino and Fusion 360

What are the terms of my Fusion 360 education license?

When sketching, I cannot select a newly created line

Why does the i help button go away when editing a feature in Fusion 360

You do not appear to be logged into the Fusion 360 Forums even though you are logged into the Autode...

Fusion 360 - The program can’t start because acge223.dll is missing from your computer

Fusion 360 Service Outage - Unable to login OR open and save data

Fusion 360: Don’t have sheet metal

Fusion 360: I have an educational license but my download says it’s a 30 day free trial

Fusion 360: Is there an option in “Multiple View” for just two viewports?

How to see which components a joint is applied to in Fusion 360

How to see which joints are associated with a particular component in Fusion 360

Is Tool Orientation supported in Fusion 360 Standard?

The selected DXF file does not contain units information

After drawing a rectangle in fusion the dimensions do not stay or are displayed

Arc moves need to be forced for all moves in a g-code program from Fusion 360

Can’t install Fusion 360:[WinError 10060] A connection attempt failed because the connected party di...

Scale of STL file from Fusion 360 is incorrect when opening in 3rd party program

“The program cant start because ASMBASE223A.dll is missing from your computer. Try reinstalling to f...

September 2017

“Autodesk Fusion 360 Cannot Be Opened Because of a Problem” error message on Mac OS

DXF files exported from Fusion 360 cannot be opened in the FlowXpert CAM software for waterjet cutti...

Empty body group folders cannot be selected in the Move to Group dialogue of Fusion 360

Error Messages in lower corner of screen disappear before they can be read - Fusion 360

Fusion 360: Which contact types are applicable to linear or nonlinear analysis within Fusion 360 sim...

How to change the High Feedrate Mode in Fusion 360 CAM / HSM

Is there an Offline Installer for Fusion 360 available?

NC Editor does not open - Fusion 360

ReCap Pro showing as “Recap” only once downloaded

Resolving Timeline Warning or Errors in Fusion 360

Roughing passes use the finishing feed rate in a 2D Contour operation in Fusion 360

Sign in Failure: There was an error while logging into Fusion 360

Trumpf l2503e how to edit or create a post processor

Uploading Files Generate Non-Preferrenced Units in Fusion 360

“Error returned from Breps_Create” when trying to mesh a model for simulation in Fusion 360

Does lattice optimization exist within Fusion 360?

Fusion 360 - How to merge existing drawings

Fusion 360 - Post processor does not appear in cloud library, despite cloud libraries being turned o...

Fusion 360 - Timeline error: The sketch plane is lost. Cache is used. Please redefine the sketch to ...

Fusion 360 installation error: PermissionError: [Errno 13] Permission denied

Fusion 360 is not opening and a urlerror is found in the webdeploy log

Fusion360.exe Bad Image. libcurl.dll is either not designed to run on Windows or contains an error

How to export an STL file from Fusion 360

How to Import an Image as an Attached Canvas

How to sketch on a 2D Drawing in Fusion 360

INVALID LICENSE FOR ANALYSIS, TRANSLATOR, OR FEATURE TYPE error messages in Fusion 360 Simulation

Is there a way to improve performance of the compute all command in Autodesk Fusion 360

Resolving “Error: Turning profile is split into two or more closed parts…” in Fusion 360 CAM Workspa...

The Data Panel, File, Save, and Undo/Redo menu is missing from Fusion 360

Unable to remove Fusion 360 from Control Panel

Unable to successfully run local solve analysis within Fusion 360

Unable to update Fusion 360, database disk image is malformed

Where to get support for a Fusion 360 API or Script

Error: [WinError 5] Access is denied when installing fusion 360

Installing Fusion 360 on Mac OSX you get the error [Errno 2] No such file or directory: ‘open’

Problems Installing Fusion 360 using Microsoft SCCM

Unable to find a design

Unable to hide the Menu bar

Unable to implement a user parameter as the input for a sheet metal rule in Fusion 360

What are general best practices for using model pattern in Fusion 360

How to create Flexible Joints in Fusion 360

Flipping the direction of sketch elements in Fusion 360

Fusion 360 is crashing during sketching

Fusion 360 -Sign In Failure : There was an error while logging in to Fusion 360.

Does Fusion 360 have a “Smart Scale” command like 123D Design?

After uninstalling an Autodesk program from your Mac you want to locate and remove any residual file...

.IAM files cannot be viewed in the Fusion 360 Mobile App

Tool image is incorrect on CAM Setup Sheets created with Fusion 360

Will I be charged once my Fusion 360 trial expires?

Why does my project folder have a red circle next to it in Fusion 360

Probe with Z surface does not allow selection point use

Quantity field does not appear in a sketch circular pattern command in Fusion 360

Rapid moves are gouging stock in a Turning Profile operation in Fusion 360 CAM

Reinstallation or update issues [Winerror 5]

The software renderer is being used; it could be due to that the graphics card is not powerful enoug...

Unable to move objects in a sketch.

Unable to move or delete files in Fusion 360

Unable to see thumbnail previews of a model in the Fusion 360 Mobile App

Generic Hurco post processor is not working

How much do the Fusion 360 webinars on demand cost?

How to turn off the origin display in Animation workspace

Chamfer doesn’t allow edits in Fusion 360

File Bloat in Fusion 360 Installation Log Files

Fusion 360 - can’t open files and “registry not found” error is in installation log

Fusion 360 - view doesn’t turn to look at newly created sketch and “stop sketch” button is missing

Fusion 360 crashes with the warning “Sufficient data not found to switch to Offline mode. Applicatio...

Fusion 360 Drawing - when placing views in Drawing, shading of model is offset

Can’t find the Sheet Metal Menu on the specific design

Custom font is not able to be used in Fusion 360 on Windows

DXF file does not upload (Fusion 360)

Can Fusion 360 run on a Chromebook?

A “DXF file does not contain units information” error message occurs when importing a DXF file to Fu...

August 2017

How to convert a mesh to a BRep in Fusion 360

How to know if Fusion 360 services are down

How to make flat patterns for rolled sheet metal designs

How to setup a thermal stress shrink fit simulation in Fusion 360

How to convert an assembly to a multi-body component in Fusion 360 to retain individual body selecti...

How to move or rotate grouped bodies in Fusion 360 after initial import?

Launching Fusion 360 generates “Unable to connect to internet” error message

Unable to open Fusion 360 without internet connection

VPAT statement for Autodesk Fusion 360

Identifying or Interrogating sketch geometry in Fusion 360

Unable to uninstall Fusion 360

Projects missing in Fusion 360

Tool Lengths are not included on CAM setups sheets created with Fusion 360

Unexpected behavior when moving a sketched spline point off of the sketch plane in Fusion 360

Autodesk Fusion 360 on Linux

Cannot create a centerline between two concentric arcs in a Fusion 360 Drawing

Change the language for Titleblock and BOM in the drawing environment of Fusion 360

How to access samples files for Fusion 360 tutorials

How to apply NPT threads in Fusion 360

How to enable Component Color Cycling on the Fusion 360 Mobile Application

How to get a Fusion 360 Enthusiast license

How to sign out from Autodesk Fusion 360

Imported .STP file into Fusion does not contain 2D sketch data

Inside of the Fusion 360 Tool Library (CAM), pressing the delete key will not delete the tool

Installing Fusion 360 on Mac OS causes error message “CorruptError”

Locally change size or orientation of appearance in Fusion 360

Converting Fusion 360 to DWG or DXF

The Sheet Metal environment is missing in Fusion 360

Fusion 360 simulation thermal analysis involving a heat source gives wrong results

How to export an STL file from an imported mesh file

How to Insert a Component into the Current Design in Fusion 360

How to insert locally saved files into a Fusion 360 design

Unable to create new projects and edit an existing project in Fusion 360 web account

How to reset toolbar customization in Fusion 360

Dimension for thread in a drawing does not get updated correctly

Can you change the language for the Fusion 360 Mobile App?

How to update graphics driver for Fusion 360 in Windows

Perspective of Fusion 360 model seems different than SketchUp

Unable to extrude past certain distance in Fusion 360

July 2017

Cannot move vector objects in Fusion 360 sketch

How to move bodies between components in Fusion 360

How to renew an expired Fusion 360 subscription using a new credit card

How to get VEX EDR parts for Fusion 360

The fluid volume command is missing from the Create menu

Projects Missing from Fusion 360

Sufficient data not found to switch to offline mode in Fusion 360

Surface body appears differently in Fusion 360 when compared to viewing on A360

The selected SVG file contains no information or some unsupported information

Unable to read measurement result and Fusion 360 shows weird number

Unable to set “Constrained Orbit” as default when shortcuts are set to “Solidworks”

Where should I save customized post processor files?

Parameters values are not updated correctly when using Fractional unit display preferences in Fusion...

Is it possible to install Fusion 360 on a specific drive?

How to turn off email notifications for recent activity on your Fusion 360 models

How to download Fusion 360

How to enable a preview feature in Fusion 360

Fusion 360 install fails on ssl.SSLError: [SSL: WRONG_VERSION_NUMBER] wrong version number (_ssl.c:2...

Fusion 360 Installation Errno 13: Permission Denied

CAM toolpath error icon but no error message

CAM toolpath error: contour selection has missing selections

CAM toolpath error: model has missing selections

CAM toolpath error: pocket selection has missing selections

CAM toolpath error: stock solid has missing selections

CAM workspace missing after failed update in Fusion 360

Black bar appears over design timeline in Fusion 360

Applied appearances and textures are rotated when cloud rendering a Fusion 360 design

Accessing individual frames of turntable renderings in Fusion 360

“Sorry, you do not have the correct entitlements to try the Fusion 360 browser experience” error mes...

Rendering multiple material combinations for the same model in Fusion 360

June 2017

How to insert DXF files in Fusion 360

Node does not exist when merging to the master branch

How to insert a mesh body into Fusion 360

How to move projects, folders and designs from a single user hub to a different team hub

How to use the local translation process to open files in Fusion 360

How to upload a file to the Data Panel in Fusion 360

How to Change Units in Fusion 360

‘Unable To Synchronize Projects’ error message in Fusion 360

Can I accurately measure STL file dimensions within Fusion 360?

Create copy command missing from the Move dialog within Fusion 360

Fusion 360 - after Sing-In, Stuck at offline Mode

Fusion 360 - Unable to connect to Internet

Fusion Dimensions 10X greater on imported .STL files

How many cloud credits does it cost to make a turntable or motion study rendering in Fusion 360

How to expand and collapse the Browser window in Fusion 360

How to render a motion study in Fusion 360

How to set Mooney-Rivlin properties for a material in Fusion 360

Parameter or other dialog is missing in Fusion 360

Unable to delete a design in Fusion 360

Cannot select linked component to create pattern in Fusion 360

Fusion 360 does not display a count-down timer displaying when the term will expire

Fusion 360 hangs infinitely or crashes while creating sketch

How to switch hubs on the Fusion 360 Mobile App

Parameter dialog box is missing

Unable to access the Fusion 360 CAM Tool Library

Can’t perform CAD operations in Fusion 360 mobile app

How to Convert a Mesh to T-Spline in Fusion 360

In Fusion 360, you are unable to insert a model through manufacturer part from parts4cad

Load set does not exists warning when using point mass in a simulation with Fusion 360

Strange behavior seen when applying appearances using selection sets created from features in Fusion...

What is the road map for the Fusion 360 drawing environment

Where to find the certification program for Fusion 360

CAM error messages

Sketch grid orientation is changed unintentionally based on the sketch plane selection in Fusion 360

The Fusion 360 right click marking menu is slow to appear on external monitors with Mac OS

Fusion360: ssl.SSLEOFError: EOF occurred in violation of protocol (_ssl.c:720)

May 2017

How to export Solidworks assembly files and open them in Fusion 360

Advantages of Team Hubs in Fusion 360

Can Fusion 360 be run on all Windows User Accounts when installed through an Administrator Account?

Can Fusion 360 send G code directly to a CNC machine?

Can I install Fusion 360 on a USB removable drive?

Dimensioning Rho for a conic curve in a Fusion 360 sketch

Export format options for Fusion 360

Fusion 360 on macOS: The ability to select mulitple holes for threading works intermittently

How to add subcomponents to Parts List in Fusion 360 Drawing

How to import DWG files into Fusion 360

How to import SVG files in Fusion 360

How to move designs between projects in Fusion 360

How to upload a SolidWorks assembly with virtual components with Fusion 360

Measurements/Dimensions are not exact in Fusion 360

Unable to enter non-English characters into text fields in Fusion 360

Black dialog appears when trying to register for Fusion 360

Cannot get Fusion 360 to work on my computer.

Certain thread types cannot be applied to hole faces in Fusion 360

Certain TTF single line fonts are recognized on Windows but not on Mac OS when working in Fusion 360

Deleting last previewed render causes Fusion 360 to freeze

Error : .f3d could not be uploaded due to access denided

Error 1920 when install Autodesk PrintStudio v1.6.5 on Windows 10

Exported IGES file from Fusion 360 does not open in FANUC RoboGuide

Fusion 360 - urlopen error [WinError 10013] An attempt was made to access a socket in a way forbidde...

Fusion 360 CAM: 2D Contour strategy is ignoring plunge feedrate

Fusion 360 crashes when updating a drawing

Imported DXF Sketches are altered when moved in Fusion 360

Inspect Probe ignore visibility of part in Fusion Simulation Results

Modes 4 through 6 have nonzero frequency in a Fusion 360 modal analysis

No appearance is shown when a material is selected in Fusion 360

Post processor folder is reset after each update

Inspect measurements and Drawing dimensions are incorrect for a partially threaded shaft in Fusion 3...

Right click menus disappear when crossing viewport borders in Fusion 360

The “Quit” keyboard shortcut does not work in Fusion 360

Unable to launch Fusion due to missing “python33.dll”

Using Adlogin.exe and Microsoft Network Monitor to troubleshoot Fusion 360 Sign-in issues

April 2017

Inserted Title Block in Fusion 360 contains more than one block and an error message appears

Fusion 360 Nonlinear static stress analysis fails with “Error: Internal solver error”

How to edit the toolbar in Fusion 360

How to use shared CAM Assets in a Fusion 360 Team Hub

Are my Fusion 360 designs private and secure?

Disable creation of automatic sketch constraints in Fusion 360

How to adjust the opacity of a body in Fusion 360

How to change the language in Fusion 360

How to install Fusion 360 on multiple computers

How to do a manual reset of the Data Panel in Fusion 360

How to reset the orbit pivot point in Fusion 360

A new parameter is created each time the distance of a Plane Along Path is altered in Fusion 360

Fusion 360 error on startup

Fusion 360 fails to create drawing for selected components

Issues with underlined text in Fusion 360

Moving sketched rectangles in Fusion 360 that have arcs attached to them causes the sketch to become...

Selected sketch contours are not previewed in the CAM Contour Editor of Fusion 360

Unable to select the entire sketch as the sweep path for the sweep function in Fusion 360

Problems with installing and running Fusion 360

Add proxy server information to Network Preferences in Fusion 360 (macOS)

Add proxy server information to Network Preferences in Fusion 360 (Windows)

“STIFFNESS MATRIX SINGULAR OR NON-POSITIVE DEFINITE” message with analysis failure in Fusion 360 Sim...

Autodesk Fusion 360 simulation “Error: Mesh failed: Body Failure” and “Error: Please inspect mesh fa...

Cannot sketch on a flat lofted face in Fusion 360

Comments in a design are deleted when focus is taken from Fusion 360

Computer Freezes and requires system restart when launching Fusion 360

Configuring anti-virus software for use with Fusion 360

Corrupted file warning with t-spline body in Fusion 360

Diagnose Interference from background processes in Windows using Safe Mode

Exported DWG from Fusion 360 does not open or opens incorrectly in 3rd party viewer

False “Term has Expired” or “Usage Limits Exceeded” reported in Fusion 360

Fusion 360 crashes when the “Select All” selection filter is disabled

Fusion 360 Error: “The browser process exits unexpectedly error in Fusion 360”

Fusion 360 generates “Unable to open” error message

Fusion 360 simulation study selection window is not displaying properly and some of the study types ...

How to change a simulation parameter per a warning message in Fusion 360

How to collect the Diagnostic Log Files for Fusion 360

Creating a sketch on a face in Fusion 360 causes unintended profiles to be extruded

Mesh bodies saved in OBJ format from Fusion 360 result in empty files

Perpendicular sketch constraint is previewed but not applied in Fusion 360

Projected solid bodies do not result in a closed contour in Fusion 360

Sketch is improperly flagged as “Fully Constrained” in Fusion 360

Sketch origin cannot be selected in Fusion 360

Sketches created with relations coincident to the origin of a Plane Along Path are not moved if the ...

Solve status for a Fusion 360 simulation does not change after a repair

The Fusion 360 Browser tree is reduced when the Compute All command is run

Trouble Using Screencast

Unable to create new material library on a Mac in Fusion 360

Unable to export PDF of 2D drawing created in Fusion 360 on a Mac

WinError 1392 during Fusion 360 Installation

You are receiving an “Error thrown by OSS” message when Copying a file in the Fusion 360 Data Panel

March 2017

Body groups are unselectable in the CAM browser of Fusion 360
Changing the opacity of a body does not work in Fusion 360
Sketched arcs reverse direction when connected by a line in Fusion 360
The Myriad CAD font cannot be exploded or extruded in Fusion 360

Designs with non-standard English characters in their name will not generate a Setup Sheet in Fusion...
Trying to open Fusion 360 in another Space on a Mac causes elements of the user interface to not app...
Using a right angle head attachment with Fusion 360’s CAM capabilities 

Clearing out residual files from a failed installation and reinstalling Fusion 360
Fusion 360 crashes upon startup with a new installation (Duet Display or Kairos Driver issue)

3D printed objects do not match model dimensions from Fusion 360
Animation fade out behavior is abrupt with certain appearances in Fusion 360
How to avoid bored geometry in a Turning > Face Profile operation in Fusion 360/ HSM CAM
How to save Fusion 360 designs for use with M3D Printers
How to use Manual NC options to manually add code with Fusion 360/HSM CAM
Truncating the design timeline when a component is activated in Fusion 360 

Adaptive clearing strategies appear to be ignoring Rest Machining settings in Fusion 360’s CAM works...
Fusion 360 - Delay when switching between designs and changing to the CAM work space
Switching between sheets in a Fusion 360 drawing causes the design to be flagged as if changes have ... 

Error: “Database table is locked” when installing or updating Fusion 360 

Converting Fusion Team trial to subscribed state 

Fusion 360 installation troubleshooting
Fusion 360 Lab installation works under Administrator account and fails to open with a student accou...

Changing the default external g-code editor in Fusion 360
How to add a Post Processor to your Personal Posts in Fusion 360
How to edit contours in Fusion 360 CAM
Lead-in angles for a Turning Profile are not generated correctly with roughing passes enabled in Fus...
Project avatars are gone after Fusion 360 updates
Sketch contours copied from the XZ plane are inverted when pasted into a new sketch in Fusion 360
Unexpected results with Hole feature extents set to “Through All” in Fusion 360
Viewing Fusion 360 designs in VR
Working with lead-in/out moves in a Turning Profile operation in Fusion 360 

How to share a link to a design with project collaborators in Fusion 360 

Fusion 360 crashes when left idle for an extended period of time
How to setup 2D adaptive clearing strategies to do finishing passes in the Z direction in Fusion 360... 

How to remove a Linked Component / XRef from the timeline 
How to add a custom 3D printer to the 3D Print Utility in Fusion 360 

Fusion 360 - Sign in Failure Due to Service Outage

February 2017

How to enter the Fusion 360 Monthly Challenge 

Adaptive clearing strategies appear to use a rectangular stock despite having a cylindrical stock se...

How to generate G code from a sketch in Fusion 360
How to toggle draft and zebra analysis on and off 

How to convert a 3d scan *.stl mesh into a solid body within Fusion 360 

WinError 740 – The Requested Operation Requires Elevation 

CAM templates are not saved to the CAMTemplates folder from Fusion 360
CAM toolpaths are invalidated when component visibility is changed in Fusion 360
Creating first and third angle projected views in Fusion 360
Finishing passes do not follow confinement offsets in Fusion 360
Limiting permissions on shared tool libraries in Fusion 360
Managing CAM templates in Fusion 360
Mirrored sketch entities are not previewed correctly in Fusion 360
Selecting decimal inches as a measurement unit in the Android Fusion 360 app gives results in decima...
The Order by Tool function does not work when both patterns and WCS duplicates exist in Fusion 360
UI elements from Fusion 360 float on top of other applications 

Data limits for Fusion 360
F0 feed rates after chamfering plunge moves in Fusion 360
Fusion 360 crashes due to installation of outdated add-ins, DXF for Laser or Helical Gear Generator
How to animate joints in Fusion 360
How to install a cloud tool library in Fusion 360
Paste vs. Paste New in Fusion 360
Screencasts do not include Fusion 360 ribbon, browser, and intended audio 

Fusion 360 crashes upon waking from sleep in Mac OS: Outdated Version of Autodesk Screencast

How to import a *.cps file from the Autodesk CAM Post Library into Fusion 360
How to move/copy a sketch, face, body or component in Fusion 360
How to Use Fusion 360’s Interference Detection to Avoid Cutting Into Your Fixtures 

An interference is reported by the Simulation Pre-check in Fusion 360

How to remove the “in use by” flag from copied Fusion 360 design in Data Panel thumbnail information 

Toolpath for text does not generate properly if the component was moved in Fusion 360 CAM

Unable to restart Fusion 360 after closing the initial launch after installation 

How to locate, uninstall, and add an Add-In from the Autodesk App Store in Fusion 360

No point available to use as reference to scale a sphere in Fusion 360 

Fusion - This process failed because of another installer live update in process. 

You are receiving an “Error: Stock Transfer is not supported. Required machine specific customizatio... 

Drawing viewed in Autodesk 360 appears differently than when viewed in Fusion 360

How to insert a standard part into a Fusion 360 design 

How to set custom navigation commands in Fusion 360 

How to scale a mesh according to the world coordinate system in Fusion 360

Menu missing from the main ribbon in Fusion 360

The body in Fusion 360 is orange and has no volume or mass associated with it 

Fusion 360 is unable to make a closed mesh

Sketch geometry offset from a projected curve does not update correctly in Fusion 360

The animation timeline in Fusion 360 disappears after an animation is reversed

The CAM simulation dialogue does not remember previously used settings in Fusion 360

The show/hide lightbulb moves in the Fusion 360 browser tree

You would like to program a manual stop or tool change in Fusion 360

Your post processor will not post the new stock transfer operations in Fusion 360 

“Error: Turning (or Milling) toolpath is not supported by the post configuration” after post process...

Defining the direction of a rotary axis in Fusion 360

Editing CAM setup sheets created with Fusion 360

Focus is lost when extruding a negative decimal distance in Fusion 360

How to export components from an assembly file as individual files from Fusion 360

Mesh bodies are not recognized in the CAM workspace of Fusion 360

Moved/ translated components jump after command in the Animation workspace of Fusion 360

PNG decals are scaled incorrectly when inserted into Fusion 360

Unable to select which CAM operation to use in Fusion 360 

How to get Graphics Diagnostic information in Fusion 360

How to move a 2d rectangle in a sketch from point to point and constrain it at it´s midpoints in Fus...

January 2017

How to do an automatic Clean Uninstall for Autodesk Fusion 360

How to edit a feature that appears in the browser tree within Fusion 360 

How to install a cloud post in Fusion 360

Importing into Fusion: stitching and validating solids 

Missing upload file icon in the Fusion 360 data panel 

Problem install Fusion360 on macOS

What specific DXF filetype is output by Fusion 360? 

You would like to add spring passes to a turning operation in Fusion 360