CNC 101

al.whatmough · ‎11-10-2015

Below is a 30 minute video explaining the basics of CNC machining:

Take your education a step further and dive into the "CNC Handbook"

http://cam.autodesk.com/docs/cncbook/en/

What resource do you use to learn CNC?

Running a Haas? Check out the set of training video Dan did at Pier 9!

[video]

---------
AL Whatmough
Director Product Management - Manufacturing

Note, I love to engage on the forums. However, I spend a lot of time in meetings trying to help clear the path for our amazing team of Developers working on Manufacturing at Autodesk. So, if I don't respond immediately, it's not that I don't care.

TMC.Engineering · ‎11-11-2015

I really like the CNC Book can that be added to Fusion under the cam area? or maybe to the Help section?

Timm

Engineer, Maker
System: Aorus X3 Plus V3, Windows 10
Plymouth Michigan, USA
Owner TMC Engineering

al.whatmough · ‎12-11-2015

Added videos from Pier 9. I hope they are a help!

---------
AL Whatmough
Director Product Management - Manufacturing

Note, I love to engage on the forums. However, I spend a lot of time in meetings trying to help clear the path for our amazing team of Developers working on Manufacturing at Autodesk. So, if I don't respond immediately, it's not that I don't care.

scottmoyse · ‎01-08-2016

I just watched the full series of videos... is there something in the air in Pier 9? They're all insane

Scott Moyse
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

RevOps Strategy Manager at Toolpath. New Zealand based.

Co-founder of the Grumpy Sloth full aluminium billet mechanical keyboard project

daniel_lyall · ‎01-09-2016

they need a pier9 in NZ

Anonymous · ‎10-27-2016

Hello

How do I stop the machine from doing a automatic tool change without have to edit the G-code. I Don't have a automatic tool change.it is doing it right at the beginning why does it do it.

I have not instructed it to do it

thanks

scottmoyse · ‎10-27-2016

Can you start a new thread & provide details about your machine and which post you are using? You might want to consider getting some training & engaging with a reseller to get your post sorted for your machine. Otherwise you can get it sorted here with the help of the community, but you definitely need to start your own thread and provide more detail.

Scott Moyse
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

RevOps Strategy Manager at Toolpath. New Zealand based.

Co-founder of the Grumpy Sloth full aluminium billet mechanical keyboard project

Anonymous · ‎10-27-2016

I have got a stepcraft 600 Machine UCCNC post I DON,T have a automatic Tool changer didn't you understand what i an saying

scottmoyse · ‎10-27-2016

@Anonymous wrote:

I have got a stepcraft 600 Machine UCCNC post I DON,T have a automatic Tool changer didn't you understand what i an saying

Yeah I understood what you were saying. Do you want some help? Please start your own thread, with all the details provided. Machine, Controller and which post you have been using. There are several answers to your question and you haven't provided enough detail. Plus this thread is about CNC 101.... not post customisation or about how to use the Fusion 360 tool definition.

Scott Moyse
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

RevOps Strategy Manager at Toolpath. New Zealand based.

Co-founder of the Grumpy Sloth full aluminium billet mechanical keyboard project

brianrepp · ‎11-17-2016

All - we have locked this thread. To help make sure we can help address your individual question or issue, please create a new thread with enough detail so that we can chime in.

Community

CNC 101

CNC 101

CNC 101