Subject Author Kudos Latest Replies
This is a topic with new unread messages
Mas Fatkhurohman,   Bisa masuk ke menu Ribbon : Content, Tab: Fasteners, nanti bisa memilih mau m...
0 0
This is a topic with new unread messages
Dear mas Ipung,   Ini menggambarnya di Inventor yah? berarti digambar di Assembly?     Haisin ...
0 0
This is a topic with new unread messages
Pagi Mas,   Bisa, karena Alias dan Inventor memang dibuat untuk bisa kolaborasi. Jadi desain prod...
0 1
This is a topic with new unread messages
Pak, kayaknya harus langsung di gambar dalam "sheet metal", disobek dengan "rip" dan  hasil seperti...
0 0
This is a topic with new unread messages
Pak, apakah tabung / piping tersebut digambar dengan menggunakan file "sheet metal"? Jika sudah dal...
0 0
This is a topic with new unread messages
Pak Fausan,   masalah Bapak sudah dijawab oleh Pak Yudhistira dalam postnya, di: http://forums.a...
0 1
This is a topic with new unread messages
Dear Chris,   It works on my Inventor 2015, thanks!     "If/when you see that white screen, on...
0 0
This is a topic with new unread messages
Pak Dedet, mungkin lebih baik customernya dianjurkan upgrade ke versi terbaru ( versi 2015 ) supay...
0 0
This is a topic with new unread messages
Hai Pak Dedet,   Pak License yang digunakan apakah versi Standalone atau Network? Spek Windows y...
0 3
This is an article with new unread content
Pak,   Untuk download tutorialnya kok gak bisa yah? pesannya " Request Permission"   https://dr...
0 0
This is an article with new unread content 0 0
This is an idea with new unread content
Hi, Is it possible for Autodesk to make a Cloud Based - File Converter From Mechanical Desktop to...
4 0
This is a topic with new unread messages
Hi Dave, Thank you for the input, I will try it.   Best Regards, Haisin Rusli
0 0
This is an idea with new unread content
Hi jtylerbc,   That's a good idea to copy ipj File instead of making project files from sketch to...
0 0
This is a topic with new unread messages
Hi ,   I was reading book from Ascent : Autodesk Vault 2013 -  Data Management for Autodesk Inve...
0 2
This is an idea with new unread content
Hi cbenner,   In my country many users are new on Inventor, they even did not know what Vault is,...
0 0
This is an idea with new unread content
Hi, I found many new users of Inventor loosing their Content Center ( Bolt, Bearing, etc ) because...
3 9
This is an idea with new unread content
Hi, After using Custom Profile for Frame Generator, we could not split Custom profile members and t...
0 0
This is an idea with new unread content
Dear LT Rusty,   Thank you for the information, I didn't know before   Best Regards,   Hai...
0 0
This is an idea with new unread content
Hi,   Please make uninstallation easy or perform an automated uninstallation of the Product Desig...
1 2