- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
AutoCAD 2013.
Usually I have all my text ready on my first layout and don't have to copy any onto additional layouts.
But on a couple of drawings I didn't do this.
Problem exists in the same drawing, I'm not trying to copy to another drawing.
I can copy paste or copy with base point and paste and it works once or twice then the copied text and objects fail to appear when I click paste..
I have to use the Purge command, save and reopen to get another one or two before it again quits.
I tried the DNG trick on one drawing but that didn't solve the problem.
This is recent issue, I'm never encountered it before.
I would welcome any input on solving this.
¡Resuelto! Ir a solución.
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
Hi and Welcome to AutoDesk Forum,
I suggest to install the latest Service Pack.
Imad Habash
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
Hi @Anonymous,
Welcome to the Autodesk Community!
Here is an AKN Article that details many of the issues that could cause the problem. I have found corruption, constraints, and Scale List to be the most common.
Please go through the suggestions one at a time and post your results here.
Please select the Accept as Solution button if my post solves your issue or answers your question.
John Vellek
Join the Autodesk Customer Council - Interact with developers, provide feedback on current and future software releases, and beta test the latest software!
Autodesk Knowledge Network | Autodesk Account | Product Feedback
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
Hi @Anonymous,
I am checking back to see if my post helped you with your problem or if you need additional assistance or information. Please add a post with how you decide to proceed and your results so other Community members may benefit.
Please hit the Accept as Solution button if my post fully solves your issue or answers your question.
John Vellek
Join the Autodesk Customer Council - Interact with developers, provide feedback on current and future software releases, and beta test the latest software!
Autodesk Knowledge Network | Autodesk Account | Product Feedback
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
I haven't had a chance to test all of the suggestions yet.
I was swamped trying to get out some paperwork.
I plan on hitting this issue Monday morning and see if all the suggestions resolve my problems.
I'll post success or failure.
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
The DGN Hotfix seems to have taken care of the last of my issues.
I know the files were a mess when I got them from the architect.
Thanks.