- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
My line type scales are different from model space to paper space. The lts in paper space is a lot larger. I have gone through much online info to get to the bottom of this with no success. I have lts at 1, celtscale 1, pslts 1 and msltale 1. Any other things I can try on this subject?
¡Resuelto! Ir a solución.
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
Hi,
if you have MSLTSCALE set to 1 and also PSLTSCALE set to 1 then the modelspace will only show the same ltscale for objects if you give the modelspace the same ANNOSCALE as the scale setting for the viewport in paperspace.
- alfred -
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------
(not an Autodesk consultant)
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
Hi @asherjoh,
It sounds like you are going the right direction.
LTSCALE
MSLTSCALE
PSLTSCALE
CELTSCLE
MSLTSCALE Overrides LTSCALE and CELTSCALE in Modelspace, but it doesn’t effect Paperspace, so it won’t change how your geometry looks inside your viewports.
What are the values yo uhave set for all of the variables? I assume that you are also performing a REGENALL to view changes.
What also is the Annotation scale set to for the viewport(s)
Please feel free to attach a drawing to if you want me to look at it.
John Vellek
Join the Autodesk Customer Council - Interact with developers, provide feedback on current and future software releases, and beta test the latest software!
Autodesk Knowledge Network | Autodesk Account | Product Feedback
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
All values are set to 1. I usually print at 1/4" to foot scale. Thanks
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
Try unchecking the "user paper space units for scaling" at linetype manager.
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar