04-02-2021
05:08 AM
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
04-02-2021
05:08 AM
Assuming the "curves" in your drawing are arcs, the length of the straight line in your drawing is:
L = 2 * Sqrt( rc^2 - ri^2)
where rc = radius of center line arc, ri = radius of inside curve
This ignores the diameter of the pipe. To include the pipe diameter use:
L = 2 * sqrt(rc^2 - (ri + diaPipe/2)^2)
where diaPipe is pipe diameter
lee.minardi