02-13-2020
02:29 AM
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
02-13-2020
02:29 AM
Hi Amanda,
You not only moved UCS in your drawing, but also rotated it in 3D. So the XY plane of the current UCS is perpendicular to YZ plane of WCS - that is why you can draw rectangles only in "vertical" position.
I also don't have any problems with REGION command, it creates regions from any of closed polylines in your drawing. Can you show which polyline you cannot to convert?
Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.
Maxim Kanaev
Architect
MARSS
Etiquette and Ground Rules of Autodesk Community
You not only moved UCS in your drawing, but also rotated it in 3D. So the XY plane of the current UCS is perpendicular to YZ plane of WCS - that is why you can draw rectangles only in "vertical" position.
I also don't have any problems with REGION command, it creates regions from any of closed polylines in your drawing. Can you show which polyline you cannot to convert?
Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.
Maxim Kanaev
Architect
MARSS
Etiquette and Ground Rules of Autodesk Community