02-23-2017
04:31 AM
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
02-23-2017
04:31 AM
Yeh on our Citizen M32, we have like you put the offsets in the tool data and this kicks out the G50 for us but if you have holders with 2 or 3 different positions on them the only way to get the 2 or 3 different G50s output is to give each operation/tool position a different offset number, unfortunately we have limited offsets on the machine.