03-19-2020
12:50 AM
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
03-19-2020
12:50 AM
Here is another approach.
You can also connect the profiles of the parts to view it as a contour.
There are many ways to do this, but not automatically.
Broaden your horizon and look at it from another point.
Use several roughing tools, still for roughing, finishing, radius extra feature maybe or also extra profiles to minimize the tool path. etc.
I hope I was able to give you suggestions to approach things differently than just automatically.
That is the approach to start.
Otherwise you will never be happy, just as a food for thought.
I wish you success.
Sorry for my english.
Sincerely yours
Mathias Beyer
You can also connect the profiles of the parts to view it as a contour.
There are many ways to do this, but not automatically.
Broaden your horizon and look at it from another point.
Use several roughing tools, still for roughing, finishing, radius extra feature maybe or also extra profiles to minimize the tool path. etc.
I hope I was able to give you suggestions to approach things differently than just automatically.
That is the approach to start.
Otherwise you will never be happy, just as a food for thought.
I wish you success.
Sorry for my english.
Sincerely yours
Mathias Beyer
Hier noch ein anderen Ansatz.
Man kann auch die Profile der Teile verbinden um es als eine Kontur zu bertrachten.
Es gibt sehr viele Wege dafür, aber nicht automatisch.
Erweitere dein Horizont und betrachte es von einem anderen Punkt aus.
Verwende mehrere Schrupp Werkzeuge, weiterhin für Schruppen, Schlichten, Radius extra Feature vielleicht oder auch extra Profile um den Werkzeugweg zu minimieren. usw.
Ich hoffe ich konnte dir Anregungen geben, mal anders an die Sache heran zu gehen als nur automatisch.
Das ist der Ansatz um zu starten.
Sonst wirst du nie glücklich werden, nur als Gedankenanstoß.
Viel Erfolg.
sorry für mein englisch.
Mit freundlichen Grüßen
Mathias Beyer
Man kann auch die Profile der Teile verbinden um es als eine Kontur zu bertrachten.
Es gibt sehr viele Wege dafür, aber nicht automatisch.
Erweitere dein Horizont und betrachte es von einem anderen Punkt aus.
Verwende mehrere Schrupp Werkzeuge, weiterhin für Schruppen, Schlichten, Radius extra Feature vielleicht oder auch extra Profile um den Werkzeugweg zu minimieren. usw.
Ich hoffe ich konnte dir Anregungen geben, mal anders an die Sache heran zu gehen als nur automatisch.
Das ist der Ansatz um zu starten.
Sonst wirst du nie glücklich werden, nur als Gedankenanstoß.
Viel Erfolg.
sorry für mein englisch.
Mit freundlichen Grüßen
Mathias Beyer