Anonymous
en respuesta a:
Anonymous
05-22-2018
08:49 AM
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
05-22-2018
08:49 AM
You're welcome 
You are right, sometimes it's easier than it looks. But remember these sharp corners will only work with no active compensation on. My milling machine with heidenhain iTNT 5xx control can not handle a 90 degree corner (without a corner radius) while active cutter compensation is on. It will give me an error like "tool radius to big" so I have to draw a radius in the geometry that fits my tool diameter...
Feel free to ask if you have some questions left
You are right, sometimes it's easier than it looks. But remember these sharp corners will only work with no active compensation on. My milling machine with heidenhain iTNT 5xx control can not handle a 90 degree corner (without a corner radius) while active cutter compensation is on. It will give me an error like "tool radius to big" so I have to draw a radius in the geometry that fits my tool diameter...
Feel free to ask if you have some questions left