Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.
Anonymous
806 Views, 6 Replies

Post for mazak variaxis

Hello,

I'm looking for a post for a mazak variaxis 500-5x. It doesn't have the tcpc option, it has the tilted work planes, rotation and 5 axis options enabled. The generic mazak post works some what. I've had to add p0 to the g53.1 commands to get rotations to work, change the g68.2 output to i j k instead of ABC but after multiple rotations the tool tries to go off the side of the table to machine there instead.  Running one operation at a time works if the table starts at a0 and b0 each time. Has anyone got an edited post or one that works well? 

 

Many thanks! 

daniel_lyall
in reply to: Anonymous

I am not a 100% sure what model the machine was but have a look at the attached post.

 

Use at your own risk and test test test before use.


Win10 pro | 16 GB ram | 4 GB graphics Quadro K2200 | Intel(R) 8Xeon(R) CPU E5-1620 v3 @ 3.50GHz 3.50 GHz

Daniel Lyall
The Big Boss
Mach3 User
My Websight, Daniels Wheelchair Customisations.
Facebook | Twitter | LinkedIn

gundagunda
in reply to: Anonymous

Hello Dean!


Did it happen that you tested the post below or found a proper one for simultaneous 5 axis as I am in search of it?

Thanks

TYLERDEZJC
in reply to: Anonymous

DOES ANYONE HAVE A WORKINIG POST FOR A MAZAK VARIAXIS 500-5X WITH MAZATROL CONTROLLER?

 

CNC_Lee
in reply to: Anonymous

@Anonymous @TYLERDEZJC @gundagunda 

If the generic Mazak posts are not providing the required output, I offer post processor development services and happy to work out a solution for your machine! Message me if I can be of further assistance.

If my post answers your question, please use Accept as Solution.

CNC Lee
Autodesk CAM Post Processor Expert
https://linktr.ee/cnclee
TYLERDEZJC
in reply to: CNC_Lee

I would love your help on fixing the post to work with my machine. How do we make this happen?

CNC_Lee
in reply to: TYLERDEZJC

@TYLERDEZJC 

You can send me a private message or email me at lee (at) cnclee (dot) com

Thank you

If my post answers your question, please use Accept as Solution.

CNC Lee
Autodesk CAM Post Processor Expert
https://linktr.ee/cnclee