08-16-2019
11:36 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
08-16-2019
11:36 PM
Lathe drilling Fanuc 3T
Hi again,
Wanting to drill a simple countersunk hole in the end of a shaft.
Code i get from the Fanuc post processor is,
(DRILL3)
N2680 M1
N2690 T0303
N2110 G98
N2710 M8
N2720 G98
N2730 G97 S1500 M3
N2740 G0 X.00 Z60.
N2750 G0 Z50.
N2760 G81 X.00 Z-3.5 R9. F333.333
N2770 G80
N2780 Z60.
N2790 M9
N2800 G28 U0.
Lathe doesnt like line N2760.
Any ideas?
Fusion