Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.
kmcgheeCMFPG
725 Views, 3 Replies

Adaptive Clearing helix will not go right to the bottom of the hole in one go?

I need to counterbore two holes in my part, I have spot drilled and drilled the screw diameter of 3/16 and now I want to come in with a 1/4" endmill and helix down to create the counterbore. It does it but in two stages, I want to do it all at once. I cannot figure out why it wont. Can someone please look at the attached file and give me some pointers?

daniel_lyall
in reply to: kmcgheeCMFPG

It is the tool settings doing it.hgfhfghfghfghfgghfg.png

 

2D pocket works.


Win10 pro | 16 GB ram | 4 GB graphics Quadro K2200 | Intel(R) 8Xeon(R) CPU E5-1620 v3 @ 3.50GHz 3.50 GHz

Daniel Lyall
The Big Boss
Mach3 User
My Websight, Daniels Wheelchair Customisations.
Facebook | Twitter | LinkedIn

kmcgheeCMFPG
in reply to: daniel_lyall

Thanks, that worked, pocket I mean, went with that. Any idea why my chamfer won't work?

daniel_lyall
in reply to: kmcgheeCMFPG

I am quite sure the Adaptive toolpath and the chamfer toolpath have a bug having the bottom hight set to anything other than the bottom of the toolpath will fail the toolpath.

 

Moving the chamfer toolpath bottom height to just under the toolpath fixies it.


Win10 pro | 16 GB ram | 4 GB graphics Quadro K2200 | Intel(R) 8Xeon(R) CPU E5-1620 v3 @ 3.50GHz 3.50 GHz

Daniel Lyall
The Big Boss
Mach3 User
My Websight, Daniels Wheelchair Customisations.
Facebook | Twitter | LinkedIn