07-26-2018
12:53 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
07-26-2018
12:53 PM
I made a 2d pocket path but i still cant keep the tool down i tried the 3d pocket only to get the same results. the horizontal works but the lift height is the problem i keep having. the pocket I am using now lifts with a feed movement to the next position. Flatness is not in my favor here so i need the tool to stay down. Keeping the tool down on the surface the entire path will solve my problem. tool 36. there are 2 paths the horizontal and the 2d pocket. the stay down selection produces the short feed lift. the smaller the number creates the rapid movement.
Fusion