Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.
thaont.cnc
249 Views, 2 Replies

Scallop 3D toolpath can not output G02, G03

How to output G02, G03 from Scallop 3D toolpath?

daniel_lyall
in reply to: thaont.cnc

You need to give a lot more info like your model you have been trying with, what post processor are you useing, why is the sky blue and what have you tryed


Win10 pro | 16 GB ram | 4 GB graphics Quadro K2200 | Intel(R) 8Xeon(R) CPU E5-1620 v3 @ 3.50GHz 3.50 GHz

Daniel Lyall
The Big Boss
Mach3 User
My Websight, Daniels Wheelchair Customisations.
Facebook | Twitter | LinkedIn

HughesTooling
in reply to: thaont.cnc

I've found scollop doesn't smooth to arcs well. If you look at the code you'll find small deviations in the Z axis on toolpaths that look flat or lots of code where all 3 axis are moving at the same time.

 

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature