- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
I specified Generic EMC for post processor and received this error log:
Information: Configuration: Generic Enhanced Machine Controller (EMC)
Information: Vendor: Autodesk, Inc.
Information: Posting intermediate data to 'C:\Users\clayton\Desktop\vhalgen.ngc'
Information: Total number of warnings: 1
Error: Failed to post intermediate NC data.
Code page changed to '1252 (ANSI - Latin I)'
Start time: Wednesday, July 22, 2015 2:26:31 AM
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.2.1 39126
Configuration path: C:\Users\clayton\AppData\Local\Autodesk\webdeploy\production\76be329ccfa969e6cd7c65a58d520471a18c0052\Applications\CAM360\Data\Posts\emc.cps
Include paths: C:\Users\clayton\AppData\Local\Autodesk\webdeploy\production\76be329ccfa969e6cd7c65a58d520471a18c0052\Applications\CAM360\Data\Posts
Configuration modification date: Friday, May 29, 2015 3:44:06 PM
Output path: C:\Users\clayton\Desktop\vhalgen.ngc
Checksum of intermediate NC data: d4121ca196ddf75121e849c672b3ec26
Checksum of configuration: 165e192f1bd9c593ed219c71a7a0484d
Vendor url: http://www.autodesk.com
Legal: Copyright (C) 2012-2014 by Autodesk, Inc.
Generated by: Fusion 360 CAM 2.0.1517
Warning: Work offset has not been specified. Using G54 as WCS.
Error: Tool orientation is not supported.
Error: Failed to invoke function 'onSection'.
Error: Failed to invoke 'onSection' in the post configuration.
Error: Failed to execute configuration.
Stop time: Wednesday, July 22, 2015 2:26:31 AM
Post processing failed.
Fusion