04-21-2017
07:03 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
04-21-2017
07:03 PM
@Anonymous wrote:
OK, but it still fails in POST even when I select faces for Top and Bottom. And Hole Top and Hole Bottom SHOULD work here, exactly like they do for drilling operations (and like they do in HSMXpress).
Regards,
Ray L.
Yes I understand there's an issue going on, but it turns out it's likely a tool number issue. What post processor are you using? This was the stock 3-axis Haas post.
Information: Configuration: Generic HAAS Information: Vendor: Haas Automation Information: Posting intermediate data to 'C:\Users\***\Desktop\10.nc' Information: Total number of warnings: 2 Error: Failed to post process. See below for details. ... Code page changed to '1252 (ANSI - Latin I)' Start time: Saturday, April 22, 2017 2:00:57 AM Code page changed to '20127 (US-ASCII)' Post processor engine: 4.2.1 41304 Configuration path: C:\Users\***\AppData\Local\Autodesk\webdeploy\production\ba8d00e1d3edcf8bc857786ba8a2c11fa2b8c071\Applications\CAM360\Data\Posts\haas.cps Include paths: C:\Users\***\AppData\Local\Autodesk\webdeploy\production\ba8d00e1d3edcf8bc857786ba8a2c11fa2b8c071\Applications\CAM360\Data\Posts Configuration modification date: Wednesday, March 1, 2017 10:30:22 PM Output path: C:\Users\***\Desktop\10.nc Checksum of intermediate NC data: dba18e940ac3fae00eb8ae26e12ea572 Checksum of configuration: 1b08930933be113d79adec9f2ab4c53f Vendor url: https://www.haascnc.com Legal: Copyright (C) 2012-2017 by Autodesk, Inc. Generated by: Fusion 360 CAM 2.0.2989 ... Warning: Tool number exceeds maximum value. Warning: Work offset has not been specified. Using G54 as WCS. Error: Length offset out of range. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Error: Failed to invoke function 'onSection'. Error: Failed to invoke 'onSection' in the post configuration. Error: Failed to execute configuration. Stop time: Saturday, April 22, 2017 2:00:57 AM Post processing failed.
Edit: is this the same post you've been using for HSMXpress?
Neal Stein
New to Fusion 360 CAM? Click here for an introduction to 2D Milling, here for 2D Turning.
Find me on:
Instagram and YouTube
New to Fusion 360 CAM? Click here for an introduction to 2D Milling, here for 2D Turning.
Find me on:
Instagram and YouTube
Fusion