11-24-2016
01:01 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
11-24-2016
01:01 PM
You have nothing set to cut.
The reasion is stock to leave is set to .5 and you have not set the bottom height to selection top faces with top height a tickle above the top face.
If you take stock to leave off, set the bottom height to selected, and for top height set the top height to 0.001 it works.
Also you can faces it by selecting the sketch and setting the tool and that's all.
Win10 pro | 16 GB ram | 4 GB graphics Quadro K2200 | Intel(R) 8Xeon(R) CPU E5-1620 v3 @ 3.50GHz 3.50 GHz
Daniel Lyall
The Big Boss
Mach3 User
My Websight, Daniels Wheelchair Customisations.
Facebook | Twitter | LinkedIn
Fusion