- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
Thank you for getting back to me and attempting to help.
The last line in the .tap file is: !Error: Failed to post data. See log for details.
I went to the log and there was nothing there.
Here is everything that posted until the failure:
(1)
(T2 D=0.25 CR=0. TAPER=120DEG - ZMIN=-0.04 - SPOT DRILL)
G90 G94 G91.1 G40 G49 G17
G20
G28 G91 Z0.
G90
(DRILL4)
M5
M9
T2 M6
S5000 M3
G54
M9
G28 G91 Z0.
G28 X0. Y0.
M30
!Error: Failed to post data. See log for details.
Not sure what I'm doing wrong as I went back to a project I created on October 10, 2016 and the post file was fine. The project that I'm currently working on was created yesterday after Fusion 360 updated itself. I'm working on a Macintosh if that makes any difference. I'm using the Mach3 generic mill post.
Thank you.
Attached is a screen shot of the log file.
Fusion