09-12-2016
07:01 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
09-12-2016
07:01 AM
So I found your post that was modified the other day and I made a modification to it.
It now has code that will give you a G1 in at a feedrate, Dwell for half a second, G1 feedrate out at a factor of 1.1. This would give you the difference you are looking for.
You will be selecting the TAPPING Cycle, and giving it a spindle speed. The dwell and retract feedrate calculation are hardcoded into the post.
It's not elegant, but it does work
Seth Madore
Owner, Liberty Machine, Inc.
Good. Fast. Cheap. Pick two.
Fusion