05-24-2023
10:41 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
05-24-2023
10:41 AM
3D Adaptive leaving extra stock on bottom face
So with axial stock to leave of .0002" (2 tenths), a minimum stepdown of just .001", and a tolerance+smoothing of .0011", I'm struggling to figure out why the face shown below in blue has .0087" of stock left after the operation.
Public video: https://youtu.be/IEykybxO4Xo
- Time Magazine’s Person of the Year 2006
- Apple M1 Max rMBP A2485 // Latest MacOS // Latest Fusion
- Usually working off files uploaded to Fusion as: Step, STL, SLDPRT. If it matters ask me.
- Apple M1 Max rMBP A2485 // Latest MacOS // Latest Fusion
- Usually working off files uploaded to Fusion as: Step, STL, SLDPRT. If it matters ask me.
06-10-2023
07:42 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
06-10-2023
07:42 PM
I'm not sure why, but I disabled stock to leave, generated the toolpath and then re-enabled stock to leave and entered the same values you started out with and the resulting toolpath changed. @DarthBane55 may have more insight on this.
06-10-2023
07:46 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
06-10-2023
07:46 PM
Ok. Even stranger - I opened your file and simply regenerated the operation and it changed.
Fusion