Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.
serge.quiblier
in reply to: jwmodel

Hi @jwmodel 

 

So, here is the modification I am suggesting to your post processor.
Open it with a text editor, like notepad.

In the beginning of the file, look for the properties definitions, and change the ones highlighted.

sergequiblier_0-1677080852418.png

 

As we don't need the lines numbers, and the machine is running in BNC mode.

Then look for the onOpen function, and we will have to delete some lines at the top of the function:

Delete all the lines in the framed section.

 

sergequiblier_1-1677080950660.png

 

This will remove the program number.

 

We will then move to the end of the post processor at the very bottom, to remove the M61, and the G69.

 

sergequiblier_2-1677081102694.png

 

After deleting this line, we will delete another one below:

sergequiblier_3-1677081172035.png

 

For the E at the end, I think it was the line number that was inappropriate.

 

Regards.

______________________________________________________________

If my post answers your question, please click the "Accept Solution" button. This helps everyone find answers more quickly!

 

 

 

 



Serge.Q
Technical Consultant
cam.autodesk.com