11-16-2022
09:15 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
11-16-2022
09:15 AM
Hi @mbanksB487R
test on the very first layers in order not to waste filament and be frustrated by a wrong code.
Codes that may be used, M0, M1, M25.
Be careful, some of these codes may completely stop the print, with no resume ability. Others may stop the hot end heating.
Take a look at this reference :
https://reprap.org/wiki/G-code
Good luck in your tests.
Fusion